Campy ergopower fixing clamp bolt
Moderator: robbosmans
-
russianbear
- Posts: 683
- Joined: Wed Apr 11, 2012 3:40 am
I was fiddling with the levers quite a bit setting up the new bars and managed to strip the alu bolt affixing the left shifter. Looks like you can buy the whole clamp with the bolt, it's part EC-SR003. I was wondering if you guys know where I can get just the torx bolt without a whole new clamp. Is it a standard sized bolt?
I've not seen the bolt available separately but you can use an alloy or ti brake mounting bolt as an alternative.
You may need to chamfer the edge if you feel the ridge under the hoods.
The short rear alloy mounting bolt that comes with Campag calipers is an ideal replacement.
Also, the older Campag ergolever steel bolts still fit.
You may need to chamfer the edge if you feel the ridge under the hoods.
The short rear alloy mounting bolt that comes with Campag calipers is an ideal replacement.
Also, the older Campag ergolever steel bolts still fit.
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
http://www.torontocycles.com/Selling/Ti ... Bolts.html
Just a little down the page. Campy ergo bolt in Ti - $10. Done.
Just a little down the page. Campy ergo bolt in Ti - $10. Done.
Evo 4.9kg SL3 6.64kg Slice RS 8.89kg viewtopic.php?f=10&t=110579" onclick="window.open(this.href);return false;" onclick="window.open(this.href);return false;
