Colnago C60 with EPS.
Moderator: robbosmans
Hi guys, anyone out there with a Colnago C60 & EPS V2 , been told you have problems fitting the battery "can only fix it with one screw on the down tube" is this correct , also frame came with a colnago chain catcher, this won't fit as the front derailleur bolt is to short, can this be chained for a longer one ? any tips would be great thanks
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
oakleaf - v2 eps is no problem on the C60 - getting the power unit aligned can be a bit tricky! - it goes on the back of the bottle cage threads on the seat tube - but if you use the longer bottle thread screw for the bottom hole, then you can use that to guide you for the upper hole
chain catcher - campagnolo do their own chain catcher - this works fine with the EPS front mech
regards
ianSWBB
chain catcher - campagnolo do their own chain catcher - this works fine with the EPS front mech
regards
ianSWBB
-
- Posts: 341
- Joined: Sat Dec 17, 2011 4:38 pm
- Location: Netherlands
Oakleave, can u post pics?
This I the bike I am looking for as well.... with Bora ultra 35
This I the bike I am looking for as well.... with Bora ultra 35
Pascal
2012 Colnago C59 MTBK Camapgnolo Hyperon Ultra 2 and Campi SR11
2014 Merida Big 99 CF team fully
2015 Pinarello F8 Sky Campagnolo Bora Utra 2 and Campi SR11 EPS (RIP after crash)
2016 Trek Mad-One Limited Team Edition
2012 Colnago C59 MTBK Camapgnolo Hyperon Ultra 2 and Campi SR11
2014 Merida Big 99 CF team fully
2015 Pinarello F8 Sky Campagnolo Bora Utra 2 and Campi SR11 EPS (RIP after crash)
2016 Trek Mad-One Limited Team Edition