Colnago C60 with EPS.

Discuss light weight issues concerning road bikes & parts.
Post Reply
Posts: 1
Joined: Sat Jul 26, 2014 10:27 pm

by oakleaf

Hi guys, anyone out there with a Colnago C60 & EPS V2 , been told you have problems fitting the battery "can only fix it with one screw on the down tube" is this correct , also frame came with a colnago chain catcher, this won't fit as the front derailleur bolt is to short, can this be chained for a longer one ? any tips would be great thanks

User avatar
Shop Wrench
Posts: 158
Joined: Tue Oct 15, 2013 6:30 am
Location: Gloucester, UK

by ianSWBB

oakleaf - v2 eps is no problem on the C60 - getting the power unit aligned can be a bit tricky! - it goes on the back of the bottle cage threads on the seat tube - but if you use the longer bottle thread screw for the bottom hole, then you can use that to guide you for the upper hole

chain catcher - campagnolo do their own chain catcher - this works fine with the EPS front mech


by Weenie

Posts: 93
Joined: Mon Aug 12, 2013 1:08 am

by rosuch

There's a tool available on the market the aligns the holes perfectly.

Posts: 348
Joined: Sat Dec 17, 2011 4:38 pm
Location: Netherlands

by rodebaron51

Oakleave, can u post pics?
This I the bike I am looking for as well.... with Bora ultra 35

2012 Colnago C59 MTBK Camapgnolo Hyperon Ultra 2 and Campi SR11
2014 Merida Big 99 CF team fully
2015 Pinarello F8 Sky Campagnolo Bora Utra 2 and Campi SR11 EPS (RIP after crash)
2016 Trek Mad-One Limited Team Edition

Post Reply
  • Similar Topics
    Last post