Weight Weenies
* FAQ    * Search    * Trending Topics
* Login   * Register
HOME Listings Blog NEW Galleries NEW FAQ Contact About Impressum
It is currently Sun Sep 25, 2016 4:53 pm
Recently the board software has been updated and there are some known bugs/failures:
- Avatars are currently not being displayed ✔ FIXED
- Tapatalk connection is currently broken ✔ FIXED
- Avatars cannot be uploaded ✔ FIXED

Please note that we will soon do some changes in WW board template design in case to get a fully mobile/desktop responsiveness board!
If you find more errors please post it here: http://weightweenies.starbike.com/forum/viewtopic.php?f=7&t=139062


All times are UTC+01:00





Post new topic  Reply to topic  [ 2 posts ] 
Author Message
PostPosted: Tue Jul 22, 2014 7:34 pm 
Offline

Joined: Wed Dec 07, 2011 1:26 am
Posts: 414
Location: California's country side
Interested in adding this to my DA caliper (Ti brake shoe bolt and backing t-nut)

Image

It says save total 5G for these few bolts, does anyone know approx. how much this would save over the OE steel hardware? I am skeptical so I think -7g for 1 caliper.

Also, I need to order a much longer brake nut about 32mm, the fork crown is oversized 1.5" and some of these calipers already gives a short stud. So the front brake, I am guessing I need 5 turns minimum engagement on the threads to be safe? Also, I feel I want to go with Ti instead of Aluminum recessed nut for better durability, what are your thoughts on the material?


Top
   
PostPosted: Tue Jul 22, 2014 8:55 pm 
Offline

Joined: Tue Nov 11, 2003 9:47 pm
Posts: 2196
Location: Santa Cruz, California, USA
Aren't the little 2mm pad stoppers aluminium already? That's all you need there.

I also have felt paranoid about using an aluminium brake nut at least on the front where there is theorticaly more force on the nut (also more bad can happen if the front brake comes loose). So I used Ti there too. You want the threads to engage at least the diameter of the bolt. So if it's a 5mm bolt and 1mm pitch threads then 5 turns would do it. This numbers are examples- I don't think it's 1mm pitch, more likely .8mm.

I'd want at least 1 diameter.


Top
   
Posted: Tue Jul 22, 2014 8:55 pm 


Top
   
 
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 2 posts ] 

   Similar Topics   Author   Replies   Views   Last post 
There are no new unread posts for this topic. Campagnolo brake caliper nut threads question *Aluminum*

in Road

alcatraz

5

372

Fri Sep 16, 2016 6:22 pm

Sooperlite View the latest post

There are no new unread posts for this topic. Sram Force brake caliper pivot bolt

in Road

Arenaaof6

6

415

Thu Aug 11, 2016 4:12 pm

Psyclebaz View the latest post

There are no new unread posts for this topic. Aero+ Caliper Brakes VS Non Aero + Disc Brake Road Bikes

in Road

Jmdesignz2

11

2141

Mon Sep 19, 2016 4:08 am

spdntrxi View the latest post

There are no new unread posts for this topic. Brake Cable upgrade question. !!

in Road

KCookie

11

872

Fri May 13, 2016 2:50 pm

KCookie View the latest post

There are no new unread posts for this topic. 2015 CAAD10 rear brake cabling parts question

in Road

CAAD997

5

607

Tue Feb 02, 2016 12:24 am

CAAD997 View the latest post


All times are UTC+01:00


Who is online

Users browsing this forum: -Robin-, 1swiftvelo, Bing [Bot], Google [Bot], mac567, tonytourist and 37 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited