campag centaur right shifter spring

Back by popular demand, the general all-things Road forum!

Moderator: robbosmans

Post Reply
Monkeyboy3333
Posts: 632
Joined: Tue Apr 05, 2011 7:41 pm

by Monkeyboy3333

Hi all, anyone rebuilt a right hand Campag centaur shifter (powershift)? mechanism appears gone and it's shifting freefall across the block when heading toward the 12th sprocket. Any advise welcomed!!

Tenlegs
Posts: 289
Joined: Wed Jul 16, 2008 10:37 am

by Tenlegs

Don't think you can rebuild them, Campag only sell the complete shifter body assembly (part EC-CE300 ?)
When that happened on my old but similar (Escape version) shifters it was due to the pin that holds the thumb button in the body bending
which meant that the pawl didn't catch on the ratchet mechanism properly, fixed it with a pin I made myself from a bit of tool steel.

by Weenie


Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓    Broad Selection ✓    Worldwide Delivery ✓

www.starbike.com



graeme_f_k
Shop Owner / Manufacturer
Posts: 609
Joined: Mon May 26, 2008 12:21 pm
Location: UK
Contact:

by graeme_f_k

Monkeyboy3333, the best fix is as suggested, a new shifter body complete.
If the lever is three y.o. or less and you have a proof of purchase, it can be looked at as a potential warranty.
A Tech-Reps work is never done ...
Head Tech, Campagnolo main UK ASC
Pls contact via velotechcycling"at"aim"dot"com, not PM, for a quicker answer. Thanks!

Post Reply