BB30a and Shimano Crank
Moderator: robbosmans
-
- Posts: 1
- Joined: Fri Dec 05, 2014 3:39 pm
Please allow me to step into this thread. For full disclosure: I am the founder and owner of Kogel Bearings.
We developed a bottom bracket specifically to fit a Shimano or GXP crank on the BB30A without any use of adapters.
it is available through our webstore. This forum does not allow me to post a web address due to our newly made account. You will find us quickly with a google search or at kogel dot cc.
If you have any questions, I will be available through email at info atkogel dot cc
Best regards,
Ard Kessels
We developed a bottom bracket specifically to fit a Shimano or GXP crank on the BB30A without any use of adapters.
it is available through our webstore. This forum does not allow me to post a web address due to our newly made account. You will find us quickly with a google search or at kogel dot cc.
If you have any questions, I will be available through email at info atkogel dot cc
Best regards,
Ard Kessels
have been using c-bear Synapse bottom bracket for gosh almost a year now. Been using their osbb-campagnolo since 2012, solid as a rock. They are the first one to come out with a no creak bottom bracket solution for campa users. Look like they have a bottom bracket for all sorts. Very happy. Send them an email, quick reply and patient with questions. Pleasure to buy from them.
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
It looks like the "instanity" is a bit reduced as now the Evo joins the Synapse with BB30A.
- Tinea Pedis
- Posts: 8616
- Joined: Sat Mar 14, 2009 6:08 am
- Contact:
What's the situation with adapters to run 24mm cranks?
- Tinea Pedis
- Posts: 8616
- Joined: Sat Mar 14, 2009 6:08 am
- Contact:
Anyone...? Specifically Rotor 3D24.
- prendrefeu
- Posts: 8580
- Joined: Wed Oct 31, 2007 10:32 pm
- Location: Glendale / Los Angeles, California
- Contact:
TP:
http://wheelsmfg.com/bottom-brackets/ca ... ?limit=all
Might be the ticket? Is the spindle a standard 24 or is it "special" like the GXP and has a quirk to it?
There's BB30A on the CAAD12 as well, but I'm going try running the SRAM Red BB30 crankset with it's standard short spindle (the BB30 Force has a longer spindle and goes into BB30A automagically) ( ). I just removed the preload adjuster to get that additional 5mm I needed.
http://wheelsmfg.com/bottom-brackets/ca ... ?limit=all
Might be the ticket? Is the spindle a standard 24 or is it "special" like the GXP and has a quirk to it?
There's BB30A on the CAAD12 as well, but I'm going try running the SRAM Red BB30 crankset with it's standard short spindle (the BB30 Force has a longer spindle and goes into BB30A automagically) ( ). I just removed the preload adjuster to get that additional 5mm I needed.
Exp001 || Other projects in the works.
-
- Posts: 235
- Joined: Tue Feb 28, 2012 9:13 pm
I second Kogel and there is c-bear too:
https://www.c-bear.com/en/products/bott ... face-rotor
Is rotor 3d24 compatible with standard shimano BBs? If it is then there is BBInfinite too:
http://bbinfinite.myshopify.com/product ... it-shimano
https://www.c-bear.com/en/products/bott ... face-rotor
Is rotor 3d24 compatible with standard shimano BBs? If it is then there is BBInfinite too:
http://bbinfinite.myshopify.com/product ... it-shimano
- Tinea Pedis
- Posts: 8616
- Joined: Sat Mar 14, 2009 6:08 am
- Contact:
It is (compatible with standard Shimano BBs).
nemeseri wrote:I second Kogel and there is c-bear too:
https://www.c-bear.com/en/products/bott ... face-rotor
Is rotor 3d24 compatible with standard shimano BBs? If it is then there is BBInfinite too:
http://bbinfinite.myshopify.com/product ... it-shimano
both are fine for CAAD12, (42 mm) but not for S6 Evo HM 2016 (PF - 46)
the latter gets my vote because the left and right sides are connected
GT56 wrote:nemeseri wrote:I second Kogel and there is c-bear too:
https://www.c-bear.com/en/products/bott ... face-rotor
Is rotor 3d24 compatible with standard shimano BBs? If it is then there is BBInfinite too:
http://bbinfinite.myshopify.com/product ... it-shimano
both are fine for CAAD12, (42 mm) but not for S6 Evo HM 2016 (PF - 46)
the latter gets my vote because the left and right sides are connected
This is crazy! I just checked and kogel and c-bear indeed has different BB30a bottom brackets for the CAAD12/Synapse and S6 HM. I wanted to go with bbinfinite for my future HM S6. It seems they don't have that BB.
prendrefeu wrote:TP:
http://wheelsmfg.com/bottom-brackets/ca ... ?limit=all
Might be the ticket? Is the spindle a standard 24 or is it "special" like the GXP and has a quirk to it?
There's BB30A on the CAAD12 as well, but I'm going try running the SRAM Red BB30 crankset with it's standard short spindle (the BB30 Force has a longer spindle and goes into BB30A automagically) ( ). I just removed the preload adjuster to get that additional 5mm I needed.
Hi, How's your experiment on SRAM RED BB30 crank on CAAD12 BB30A? I'm goona do it if there's good news on your project.
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
- iliedanila
- Posts: 122
- Joined: Mon Feb 15, 2016 7:30 pm
- Location: Romania
http://kogelbearings.mysimplestore.com/ ... ano-cranks
This is what you need.
Sent from my SM-G928F using Tapatalk
This is what you need.
Sent from my SM-G928F using Tapatalk