Which PF 30 bottom bracket

Discuss light weight issues concerning road bikes & parts.
Posts: 34
Joined: Thu May 27, 2010 2:36 pm

by Teletori

Does the Chris King PF30 sleeve give enough room for Di2 wires?

Going to put a bottom bracket like this om my FF, and is a bit hesitant about having cables rubbing on axle.

by Weenie

Posts: 723
Joined: Sun Jan 26, 2014 3:44 am

by TheDarkInstall

I would have thought that any sleeve which is of a smaller diametre than the cups of the BB will give enough room for the cables...

Posts: 1097
Joined: Tue May 23, 2006 4:33 am

by 11.4

I have two frames, both with King PF30 bottom brackets, and both fit the wires no problem. I'm not sure what the issue is. There's quite a bit of room between the diameter of the shell and the diameter of the bottom bracket sleeve.

Posts: 34
Joined: Thu May 27, 2010 2:36 pm

by Teletori


Looking at pictures, it does not look like there is room, but good to have confirmed it will fit.


Posts: 112
Joined: Tue May 20, 2008 5:34 am

by allenpg

Plenty of room on the Evo Di2 with the CK BB

Sent from my iPad using Tapatalk

Posts: 793
Joined: Tue Jan 13, 2009 2:35 am

by topflightpro

Slightly off topic, but I just ordered a Wheels Manufacturing BB86/92 bottom bracket, so it is similar in design to the PF30 but just a different size. I went with the Angular Contact bearings as the ceramics were out of stock.

I have not yet installed it as my new frame has not yet arrived, but the quality seems pretty good. Have not had a chance to weigh it either. I went with the Wheels Manufacturing because the angular contact bearings are supposed to be better than the basic Sram steel bearings. And the Sram ceramic is ridiculously priced.

I also like that I can replace just the bearings in the future, which is like $22 for angular contact, and a bit more for ceramic.

(As a side note, I got it really cheap from a buddy and he did not have access to CK parts through his distributor.)

I'll post an update in a few weeks to let you know how it's working.

Post Reply
  • Similar Topics
    Last post