Weight Weenies
* FAQ    * Search    * Trending Topics
* Login   * Register
HOME Listings Blog NEW Galleries NEW FAQ Contact About
It is currently Fri Apr 29, 2016 5:09 pm

All times are UTC+01:00





Post new topic  Reply to topic  [ 3 posts ] 
Author Message
PostPosted: Sun Mar 16, 2014 9:38 pm 
Offline

Joined: Sun Mar 16, 2014 9:20 pm
Posts: 2
Hi everyone

I was wondering if you may be able to help?!?

I have a Colnago Arte frame, (I think it is 2007) bare aluminium look with carbon stays. It was apparent the other day that the alu had a rather bad case of corrosion, I.e. white and flaky in places. I rubbed this back to see if it had damaged the frame and it looks ok, at worse a very light pin prick mark under the bb.

However, now the frame looks like it has a disease. I considered a pro respray but a) I can't afford it and b) you guys seem to know what you are doing!

Now the carbon should be ok, I have searched the forum and there are some good guides on getting the decals off and getting a nice clean look.

However, the frame is another issue. I was thinking matt black may look cool (but have heard it shows wear easier???) But either way there are some practical issues. Therefore...

Is it worth the hassle?
How hard will it be?
Am I going to end up dropping more in paint and stuff that getting a Argos or similar job?
And if all the above are positive - how is the best way to go about it?

Thanks in advance!

TM


Top
   
PostPosted: Mon Mar 17, 2014 2:59 am 
Offline

Joined: Fri Feb 10, 2012 4:27 pm
Posts: 535
repainting a carbon/alu hybrid may be tricky. you can't use traditional paint strippers because that may damage the carbon. that makes paint removal on the alu frame alot harder. you might have to sand off the paint by hand. If you are serious about this I'd recommend painting the alu parts and just masking off the bare carbon.

as for painting the alu frame, there are tons of articles out there on painting alu/steel frames. google is your friend.

I can't really answer if it 'will be worth' the hassle or how hard it will be because that depends largely on your definition of worth and your mechanical aptitude and access to paint/chemicals.


Top
   
PostPosted: Mon Mar 17, 2014 8:17 am 
Offline

Joined: Sun Mar 16, 2014 9:20 pm
Posts: 2
Hi, thanks for the reply.

Agree, I was going to sand the carbon to get the decals off etc and then mask it and strip the ALU.

My aptitude is probably sufficient though my access to gear is confined to local stores.

I will Google some more but would be interested to know if anyone has undertaken a similar project on ww.

Cheers☺


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 3 posts ] 

All times are UTC+01:00


Who is online

Users browsing this forum: CanadianBiker, crn, Delorre, Google Adsense [Bot], jeffy, kwm24 and 36 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited