Back by popular demand, the general all-things Road forum!
Moderator: robbosmans
-
mrtkcmz
- Posts: 57
- Joined: Wed Jul 15, 2015 5:00 pm
by mrtkcmz on Sun Aug 20, 2017 10:23 pm
seansis wrote:Hello
Can I use clip on bars on zipp sl 70 aero?
For example, if I install the narrowest stem (for example, 3T ARX).
Can not be installed clip on only because the width of the diameter of 31.8 is too small?
Or are there other reasons?
Thank you.
sorry. not enough space for clip on bars
-
Renne
- Posts: 121
- Joined: Sun Nov 13, 2011 10:06 pm
by Renne on Mon Aug 21, 2017 1:07 pm
seansis wrote:Is there another aero handlebar so that I can install clip on it?
3T aeronova, Specialized aerofly, Easton ec 70/90 aero?...
I have Easton EC90 Aero bars and I can assure you there is no room for aero bars (barely enough room to fit a computer mount with my Easton EC90 SL stem).
-
mrtkcmz
- Posts: 57
- Joined: Wed Jul 15, 2015 5:00 pm
by mrtkcmz on Tue Oct 17, 2017 9:54 pm
seansis wrote:If I find aerobar with narrow clamps for handlebar, can I use it? I will not break handlebar if use a clip on?
+1 same problem here. what if I found a narrow one? do you advice to use it?
-
romalor
- Posts: 241
- Joined: Sun Jul 26, 2015 3:56 pm
-
boots2000
- Posts: 1393
- Joined: Mon Oct 15, 2007 9:28 pm
by boots2000 on Wed Oct 18, 2017 4:38 pm
It should work- The internal routing holes up higher should allow the wire from the box to get to the shifter.
Just need the box and appropriate sized wire.
muntos wrote:Does anyone knows if it will work or installed the new Shimano DI2 EW-RS910 Junction for Bar on SL-70 ?
-
mrtkcmz
- Posts: 57
- Joined: Wed Jul 15, 2015 5:00 pm
by mrtkcmz on Sun Oct 22, 2017 7:11 pm
seansis wrote:I already have this handlebar (zipp sl 70 aero).
And I did not plan to sell it.
So ... who knows the answer to the question - please help.
+1
-
Miller
- Posts: 2765
- Joined: Thu Sep 21, 2006 8:54 pm
- Location: Reading, UK
by Miller on Sun Oct 22, 2017 9:20 pm
I have the Zipp SL70 aero bar and with a Zipp stem there's less than 10mm of space either side of the stem faceplate before the bar starts flaring out into the aero shape. I can only just fit the clamp for an outfront mount into the space.
Clamps for aerobars have to be much stronger than a clamp for an outfront mount. I'd be amazed if you could find a bar with a clamp narrow enough to fit and if you did I would have doubts about its security. I think you're out of luck with trying to fit aero extensions to the SL70 bar.