Weight Weenies
* FAQ    * Search    * Trending Topics
* Login   * Register
HOME Listings Blog NEW Galleries NEW FAQ Contact About Impressum
It is currently Mon Oct 23, 2017 5:41 am

All times are UTC+01:00





Post new topic  Reply to topic  [ 23 posts ]  Go to page Previous 1 2
Author Message
PostPosted: Thu Jun 26, 2014 9:36 am 
Offline
User avatar

Joined: Wed Dec 15, 2010 10:32 am
Posts: 559
Location: Estonia
I let the machine shop to cut off 1mm of the Ultegra 11s cassette and now it fits perfectly on 10s freehub.

EDIT: it fits to the Novatec hub, but does not fit to the DA7800 hub. DA has 0,8mm less room.

Image
Image

_________________
"Nothing compares to the simple pleasure of a bike ride"
Domane
Jamis Renegade Expert
Spark 900 RC


Top
   
PostPosted: Thu Jun 26, 2014 1:29 pm 
Offline

Joined: Wed Feb 09, 2005 4:51 am
Posts: 1944
That's a 28T cassette ?

Do note that it will not work with some wheels once you have a 25T to cog. And it will not work with a most wheels if its a 23T. As the rivet flanges might hit your spokes or your RD might do that on the largest cog too.

Be careful when you attempt to do the same with cassettes smaller than 28T.


Top
   
Posted: Thu Jun 26, 2014 1:29 pm 


Top
   
 
PostPosted: Thu Jun 26, 2014 1:54 pm 
Offline
User avatar

Joined: Wed Dec 15, 2010 10:32 am
Posts: 559
Location: Estonia
It´s 12-25 and does not hit the spokes.

_________________
"Nothing compares to the simple pleasure of a bike ride"
Domane
Jamis Renegade Expert
Spark 900 RC


Top
   
PostPosted: Thu Jun 26, 2014 8:49 pm 
Offline
in the industry
User avatar

Joined: Sun Jul 29, 2012 2:59 pm
Posts: 855
Location: Ruidoso, NM
Cool... but best to take off more (at least 1.85mm) and use thin spacers to fine tune.

I'm amazed that no one is doing this commercially... yet. The machine shop can probably crank these out in no time.

_________________
formerly rruff...


Top
   
PostPosted: Thu Jun 26, 2014 11:38 pm 
Offline

Joined: Tue Apr 22, 2008 4:31 am
Posts: 346
So the reality is that without changing the hub, you can take the 1.85mm off the back of the cassette or the hub.

One is a do once job, but may ruin the hub, the other is do each cassette change, but worst is that the cassette gets buggered.

Hmmmmmmm

For me, the dilemma is that with the CM MTB Disc hub I am using (HDWR-3), I can get an SRAM XX1 or Shimano 10sp freehub only, but with the road hubs (non disc), they do the 11sp freehubs .

It's hard to get suitable info to see what the difference between the two is.

Will have to have a closer look at the options.


Top
   
PostPosted: Fri Jun 27, 2014 8:32 am 
Offline
User avatar

Joined: Sun Dec 21, 2003 8:32 pm
Posts: 1473
Location: WALES,UK
I thought Ultegra 11 carriers were carbon, that looks like alloy?

_________________
Ti or dye!

The Weenie formally known as CAADHEAD


Top
   
PostPosted: Fri Jun 27, 2014 9:55 pm 
Offline
in the industry
User avatar

Joined: Sun Jul 29, 2012 2:59 pm
Posts: 855
Location: Ruidoso, NM
BeeBee30 wrote:
I thought Ultegra 11 carriers were carbon, that looks like alloy?


Ultegras are aluminum. These cassettes can be had for <$70... no carbon in them.

_________________
formerly rruff...


Top
   
PostPosted: Fri Jun 27, 2014 10:13 pm 
Offline

Joined: Sat Jul 29, 2006 2:36 am
Posts: 1353
Location: UK
The first cluster (pair of sprockets) is on a carbon carrier (unless the design has been changed).
The last cluster of 3 (biggest) sprockets is on an aluminium carrier.


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 23 posts ]  Go to page Previous 1 2

   Similar Topics   Author   Replies   Views   Last post 
There are no new unread posts for this topic. Any ideas on lightening Epoch DNP 10 speed freewheel?

in Road

yumseyo

0

124

Thu Jun 22, 2017 7:06 pm

yumseyo View the latest post

There are no new unread posts for this topic. Compatibility Question - 11 speed Crankset & 9 Speed running gear

in Road

pfnsht

13

468

Fri Aug 25, 2017 2:31 pm

goodboyr View the latest post

There are no new unread posts for this topic. Family Budget 5700 10 Speed to 11 Speed questions

[ Go to page: 1 2 ]

in Road

Afnole16

15

1100

Thu Dec 22, 2016 5:06 pm

JamesGRC View the latest post

There are no new unread posts for this topic. Campagnolo 11 speed crank w/ 9 speed chain Compatability

in Road

rgamble

6

943

Fri Oct 28, 2016 9:09 am

icenutter View the latest post

There are no new unread posts for this topic. Campag 10 speed cassette with 11 speed chain?

in Road

campagowlo

5

658

Sun Apr 16, 2017 1:10 am

BRM View the latest post


All times are UTC+01:00


Who is online

Users browsing this forum: Baidu [Spider], Bing [Bot], dvq, Google Adsense [Bot], kurisu, s0s0s0s0, vejnemojnen, Yahoo [Bot] and 30 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited