Over-spec'd hub set?
Moderator: robbosmans
Considering building up a set of open mould new profile carbon tubulars 24/28 in the 40-56mm rim height range. Thinking about a set of White Industries T11 hubs - one of my favorite sets. Wondering if that would be under-utilizing such a nice hub and whether I should use something like BHS, Novatec or Circus Monkey grade hubs instead.
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
The rims you use doesn't seem to play any role in the difference in experience these hubs will give you? Unless you are wondering if you personally will be underutilizing the hubs, in which case I agree, most people don't see any benefit from the price premium of heavy American made hubs so they save money with Taiwanese parts.
- Zen Cyclery
- Shop Owner
- Posts: 1244
- Joined: Tue Mar 10, 2009 5:27 am
- Location: McCall, ID
- Contact:
I think the T11s could be a great option for your build. I've found that they aren't nearly as popular on Weight Weenies seeing as they come in a bit heavy at 345 grams for the hubset. Aside from that though they're extremely durable, and super easy to service when that time finally does come. And the fact that they come in a full color lineup now really seals the deal for me. For the price I don't think there's any hubset out there that can beat them.
pam wrote:The rims you use doesn't seem to play any role in the difference in experience these hubs will give you? Unless you are wondering if you personally will be underutilizing the hubs, in which case I agree, most people don't see any benefit from the price premium of heavy American made hubs so they save money with Taiwanese parts.
yes, that was really the question -- overkill/more expensive that the value delivered.
-
- in the industry
- Posts: 5777
- Joined: Sat May 12, 2012 7:25 pm
- Location: Glermsford, Suffolk U.K
- Contact:
345g is not that heavy. Much lighter hubs will increasing tend to have comprimises built into them. The T11 have no comprimises which I like. Dura Ace are similar in this regard also Royce but some would consider those paper weight at 430g, I think they are just right. What you notice in a wheelset is low weight rims not low weight hubs.
Besides the other benefits of the Whites listed above, they roll very well.
And the Ti freehub can handle large solo cogs without notching.
The decision comes down to do you value durability and low rolling resistance more, or light weight and lower price more?
And the Ti freehub can handle large solo cogs without notching.
The decision comes down to do you value durability and low rolling resistance more, or light weight and lower price more?
eric wrote:Besides the other benefits of the Whites listed above, they roll very well.
And the Ti freehub can handle large solo cogs without notching.
The decision comes down to do you value durability and low rolling resistance more, or light weight and lower price more?
Oh, I've had WI before and really have liked them. I'm leaning toward getting a set, then if I don't like the wheels with whatever carbon tubular rims I end up getting (that's a whole 'nuther thread so won't go there) I'll still have a set of awesome hubs.
If only I could find a set of 24/28 H2/H3 for Campy; I do like those aesthetics better than the T11s...
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com