Page 1 of 4
Slamthatstem style dust cover
Posted: Fri Feb 28, 2014 1:06 am
by drmutley
I'm in Australia and am after a headset bearing dust cover, similar to the STS style. Now that STS have made it harder to purchase the dust cover OS, I'm wondering if there are any others available online? eBay and Google isn't showing much... Any suggestions guys?
Slamthatstem style dust cover
Posted: Fri Feb 28, 2014 1:06 am
by Weenie
Visit
starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
Re: Slamthatstem style dust cover
Posted: Fri Feb 28, 2014 1:59 am
by grover
Re: Slamthatstem style dust cover
Posted: Fri Feb 28, 2014 2:30 am
by drmutley
grover wrote:http://veloflyte.com/ultra_low_stack_height_carbon_fiber_integrated_headset_dust_shields
Out of stock/doesn't make them no more/not a nice guy to deal with
Any others?
Re: Slamthatstem style dust cover
Posted: Fri Feb 28, 2014 3:55 am
by Tinea Pedis
Depending on what you ride, Pinarello have one. DeGrandi's fitted it with my Graal.
Give them a call. I'd say they'll have some unbranded ones too.
Re: Slamthatstem style dust cover
Posted: Fri Feb 28, 2014 4:30 pm
by FilmAt11
Re: Slamthatstem style dust cover
Posted: Mon Mar 03, 2014 11:23 am
by trychle
Cobb cycling offers a 5mm topcap.
Can be bought
here, and a small write-up can be found
here.
Ciao.
Re: Slamthatstem style dust cover
Posted: Mon Mar 03, 2014 12:11 pm
by HillRPete
Looking for one too, with EU availability. Any leads? Cheers.
Re: Slamthatstem style dust cover
Posted: Mon Mar 03, 2014 12:30 pm
by DartanianX
FSA do one. They hooked me up with this when I was sponsored by them.
Sent from my Nexus 4 using Tapatalk
Re: Slamthatstem style dust cover
Posted: Mon Mar 03, 2014 3:53 pm
by cnbky
Tinea Pedis wrote: my Graal
Nice! Do you have a thread for that in the introduction?
Re: Slamthatstem style dust cover
Posted: Mon Mar 03, 2014 5:59 pm
by drainyoo
I got a 8mm carbon one on eBay that weights 5g. You have to search for "conical headset spacer".
Re: Slamthatstem style dust cover
Posted: Mon Mar 03, 2014 7:31 pm
by Sjoerd
Nice, thanks for sharing that.
Re: Slamthatstem style dust cover
Posted: Mon Mar 03, 2014 9:46 pm
by G60
If it's for a CAAD10 (Cannot verify fitment with anything else), any BMX Campy spec headset dust cover should fit.
I got a complete BMX headset that included a 15mm and 5mm dust cover for about $20 USD on eBay.
Didn't weigh it, but it feels substantially lighter than the 25mm Tange dust cover that came with my CAAD10.
Re: Slamthatstem style dust cover
Posted: Mon Mar 03, 2014 10:32 pm
by tinozee
I'd love one of these too, as low as possible. It looked like the sts ones were only like 1-2mm. I see a lot of bikes now with the stem right on the bearing, with maybe a few micro spacers in there.
Re: Slamthatstem style dust cover
Posted: Wed Mar 05, 2014 2:21 pm
by drmutley
Yep the STS ones are 1mm
Re: Slamthatstem style dust cover
Posted: Wed Mar 05, 2014 2:21 pm
by Weenie
Visit
starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
Re: Slamthatstem style dust cover
Posted: Wed Mar 05, 2014 2:59 pm
by 1415chris
Thanks for the tip with zodiac cup. 44mm that is what I'm looking for.
But 24$ for shipping puts me in the search mode again.
