Help to verify freehub body replacement

Back by popular demand, the general all-things Road forum!

Moderator: robbosmans

Post Reply
sdexter
Posts: 5
Joined: Sat Dec 21, 2013 3:14 am

by sdexter

hi all,

I'm very new here and at the moment i had a project that has to be postponed due to GS doesnt fit freehub body.

So my WS is Fulcrum racing 1 (2012 version) and i used ultegra 6800 GS.
Im thinking to replace the freehub body better then get a new set of WS such as mavic ksyrium, etc.
I've been searching on *bay and found couple, but im not 100% sure, there for i need help to verify is the freehub body fit my WS

here's the link:
http://www.ebay.ca/itm/Fulcrum-Campagno ... 51b8d58f72

Geoff
Posts: 5395
Joined: Sat Dec 13, 2003 2:25 am
Location: Canada

by Geoff

Welcome.

I think that you are saying you have a Fulcrum wheelset with a Campagnolo freehub. You are running a Shimano Groupset and need to convert the freehub. If that is accurate, the link that you had posted should work for you.

by Weenie


Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓    Broad Selection ✓    Worldwide Delivery ✓

www.starbike.com



User avatar
jekyll man
Posts: 1570
Joined: Wed Apr 25, 2007 10:23 am
Location: Pack filler

by jekyll man

That's not quite how I read it Geoff-

Its the ebay link that's misleading.

Its a 10spd shimano wheel, but the groupset is 11 speed. Needs a redesigned freehub.

It might fit, but i'm not sure if a shorter NDS spacer is needed too.

The other option is to get a campag freehub body, and run an 11 campag cassette...
Official cafe stop tester

sdexter
Posts: 5
Joined: Sat Dec 21, 2013 3:14 am

by sdexter

sorry if my request for help is not clear.

So im building a new bike with ultegra 6800, and i got an older version of Fulcrum racing 1.
The fulcrum racing 1 freehub body is for 10speed.
I planned to replace the freehub body with 11 speed so i can use my ultegra 6800 without buying a whole new wheelset.

After searching on ebay, i found that link on my post above.
But i couldnt get clear description regarding the fitment, there for i need help to verify

User avatar
ultimobici
in the industry
Posts: 4460
Joined: Sun Nov 21, 2004 2:45 pm
Location: Trento, Italia
Contact:

by ultimobici

Why not try your lbs?

Causidicus
Posts: 320
Joined: Tue Apr 17, 2012 11:20 am

by Causidicus

.
Last edited by Causidicus on Tue Jun 17, 2014 11:59 pm, edited 1 time in total.

sdexter
Posts: 5
Joined: Sat Dec 21, 2013 3:14 am

by sdexter

Causidicus wrote:
sdexter wrote:I planned to replace the freehub body with 11 speed so i can use my ultegra 6800 without buying a whole new wheelset.

Look in the Fulcrum or Campagnolo parts catalogues.
You need Fulcrum RS-113 or Campagnolo FH-BUU015X1. Same part.


thnx Causidicus.
i have no experience in replacing freehub before,
does rs-133 or fh-buu015x1 need longer axle?

I hope this is just as simple as just open the fastener bolt and install the new freehub body

Causidicus
Posts: 320
Joined: Tue Apr 17, 2012 11:20 am

by Causidicus

.
Last edited by Causidicus on Tue Jun 17, 2014 11:59 pm, edited 1 time in total.

sdexter
Posts: 5
Joined: Sat Dec 21, 2013 3:14 am

by sdexter

sweet, thnx Causidicus

nealrab
Posts: 33
Joined: Mon Feb 17, 2014 5:47 am

by nealrab

I was in the same predicament recently with an older Fulcrum R1 set that was never used, but I decided to keep the old freehub for Shimano 8/9/10 and just went with Ultegra 6700. Would be interested to hear how the freehub switchout went when you're done sdex...

goodboyr
Posts: 1487
Joined: Wed Jan 10, 2007 10:56 pm
Location: Canada

by goodboyr

I switched over a fulcrum zero recently. Causidicus time estimate is just about right!

by Weenie


Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓    Broad Selection ✓    Worldwide Delivery ✓

www.starbike.com



Post Reply