Help to verify freehub body replacement
Moderator: robbosmans
hi all,
I'm very new here and at the moment i had a project that has to be postponed due to GS doesnt fit freehub body.
So my WS is Fulcrum racing 1 (2012 version) and i used ultegra 6800 GS.
Im thinking to replace the freehub body better then get a new set of WS such as mavic ksyrium, etc.
I've been searching on *bay and found couple, but im not 100% sure, there for i need help to verify is the freehub body fit my WS
here's the link:
http://www.ebay.ca/itm/Fulcrum-Campagno ... 51b8d58f72
I'm very new here and at the moment i had a project that has to be postponed due to GS doesnt fit freehub body.
So my WS is Fulcrum racing 1 (2012 version) and i used ultegra 6800 GS.
Im thinking to replace the freehub body better then get a new set of WS such as mavic ksyrium, etc.
I've been searching on *bay and found couple, but im not 100% sure, there for i need help to verify is the freehub body fit my WS
here's the link:
http://www.ebay.ca/itm/Fulcrum-Campagno ... 51b8d58f72
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
Welcome.
I think that you are saying you have a Fulcrum wheelset with a Campagnolo freehub. You are running a Shimano Groupset and need to convert the freehub. If that is accurate, the link that you had posted should work for you.
I think that you are saying you have a Fulcrum wheelset with a Campagnolo freehub. You are running a Shimano Groupset and need to convert the freehub. If that is accurate, the link that you had posted should work for you.
- jekyll man
- Posts: 1570
- Joined: Wed Apr 25, 2007 10:23 am
- Location: Pack filler
That's not quite how I read it Geoff-
Its the ebay link that's misleading.
Its a 10spd shimano wheel, but the groupset is 11 speed. Needs a redesigned freehub.
It might fit, but i'm not sure if a shorter NDS spacer is needed too.
The other option is to get a campag freehub body, and run an 11 campag cassette...
Its the ebay link that's misleading.
Its a 10spd shimano wheel, but the groupset is 11 speed. Needs a redesigned freehub.
It might fit, but i'm not sure if a shorter NDS spacer is needed too.
The other option is to get a campag freehub body, and run an 11 campag cassette...
Official cafe stop tester
sorry if my request for help is not clear.
So im building a new bike with ultegra 6800, and i got an older version of Fulcrum racing 1.
The fulcrum racing 1 freehub body is for 10speed.
I planned to replace the freehub body with 11 speed so i can use my ultegra 6800 without buying a whole new wheelset.
After searching on ebay, i found that link on my post above.
But i couldnt get clear description regarding the fitment, there for i need help to verify
So im building a new bike with ultegra 6800, and i got an older version of Fulcrum racing 1.
The fulcrum racing 1 freehub body is for 10speed.
I planned to replace the freehub body with 11 speed so i can use my ultegra 6800 without buying a whole new wheelset.
After searching on ebay, i found that link on my post above.
But i couldnt get clear description regarding the fitment, there for i need help to verify
- ultimobici
- in the industry
- Posts: 4462
- Joined: Sun Nov 21, 2004 2:45 pm
- Location: Trento, Italia
- Contact:
Why not try your lbs?
-
- Posts: 320
- Joined: Tue Apr 17, 2012 11:20 am
.
Last edited by Causidicus on Tue Jun 17, 2014 11:59 pm, edited 1 time in total.
Causidicus wrote:sdexter wrote:I planned to replace the freehub body with 11 speed so i can use my ultegra 6800 without buying a whole new wheelset.
Look in the Fulcrum or Campagnolo parts catalogues.
You need Fulcrum RS-113 or Campagnolo FH-BUU015X1. Same part.
thnx Causidicus.
i have no experience in replacing freehub before,
does rs-133 or fh-buu015x1 need longer axle?
I hope this is just as simple as just open the fastener bolt and install the new freehub body
-
- Posts: 320
- Joined: Tue Apr 17, 2012 11:20 am
.
Last edited by Causidicus on Tue Jun 17, 2014 11:59 pm, edited 1 time in total.
I was in the same predicament recently with an older Fulcrum R1 set that was never used, but I decided to keep the old freehub for Shimano 8/9/10 and just went with Ultegra 6700. Would be interested to hear how the freehub switchout went when you're done sdex...
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com