Help to verify freehub body replacement

[sdexter]

hi all,

I'm very new here and at the moment i had a project that has to be postponed due to GS doesnt fit freehub body.

So my WS is Fulcrum racing 1 (2012 version) and i used ultegra 6800 GS.
Im thinking to replace the freehub body better then get a new set of WS such as mavic ksyrium, etc.
I've been searching on *bay and found couple, but im not 100% sure, there for i need help to verify is the freehub body fit my WS

here's the link:
http://www.ebay.ca/itm/Fulcrum-Campagno ... 51b8d58f72

[Geoff]

Welcome.

I think that you are saying you have a Fulcrum wheelset with a Campagnolo freehub. You are running a Shimano Groupset and need to convert the freehub. If that is accurate, the link that you had posted should work for you.

[jekyll man]

That's not quite how I read it Geoff-

Its the ebay link that's misleading.

Its a 10spd shimano wheel, but the groupset is 11 speed. Needs a redesigned freehub.

It might fit, but i'm not sure if a shorter NDS spacer is needed too.

The other option is to get a campag freehub body, and run an 11 campag cassette...

[sdexter]

sorry if my request for help is not clear.

So im building a new bike with ultegra 6800, and i got an older version of Fulcrum racing 1.
The fulcrum racing 1 freehub body is for 10speed.
I planned to replace the freehub body with 11 speed so i can use my ultegra 6800 without buying a whole new wheelset.

After searching on ebay, i found that link on my post above.
But i couldnt get clear description regarding the fitment, there for i need help to verify

[ultimobici]

Why not try your lbs?

[Causidicus]

.

[sdexter]

I planned to replace the freehub body with 11 speed so i can use my ultegra 6800 without buying a whole new wheelset.

Look in the Fulcrum or Campagnolo parts catalogues.
You need Fulcrum RS-113 or Campagnolo FH-BUU015X1. Same part.

thnx Causidicus.
i have no experience in replacing freehub before,
does rs-133 or fh-buu015x1 need longer axle?

I hope this is just as simple as just open the fastener bolt and install the new freehub body

[Causidicus]

.

[sdexter]

sweet, thnx Causidicus

[nealrab]

I was in the same predicament recently with an older Fulcrum R1 set that was never used, but I decided to keep the old freehub for Shimano 8/9/10 and just went with Ultegra 6700. Would be interested to hear how the freehub switchout went when you're done sdex...

[goodboyr]

I switched over a fulcrum zero recently. Causidicus time estimate is just about right!