Quarq upgrade, what to do...

Back by popular demand, the general all-things Road forum!

Moderator: robbosmans

AndreLM
Posts: 479
Joined: Tue Feb 05, 2013 11:53 pm

by AndreLM

As per Praxis FAQ:

POWER METERS - Do your rings work with the spider based power meter systems?
YES – Our rings work great on Power2Max, SRM, and newer Quarq systems. Some older Quarq systems were finicky in calibration and per Quarq our 52/36 set and 53/39 Clover calibrated best on those. But the newer Quarq Elsa and Riken are no problem at all. Mount them up!

r_mutt
Posts: 412
Joined: Sat Feb 23, 2008 6:33 pm

by r_mutt

AndreLM wrote:As per Praxis FAQ:

POWER METERS - Do your rings work with the spider based power meter systems?
YES – Our rings work great on Power2Max, SRM, and newer Quarq systems. Some older Quarq systems were finicky in calibration and per Quarq our 52/36 set and 53/39 Clover calibrated best on those. But the newer Quarq Elsa and Riken are no problem at all. Mount them up!



i would tend to follow Quarq's recommendation for the non-clover type for the Riken/Elsa rather than the advice of the chainring manufacturer.

by Weenie


Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓    Broad Selection ✓    Worldwide Delivery ✓

www.starbike.com



AndreLM
Posts: 479
Joined: Tue Feb 05, 2013 11:53 pm

by AndreLM

I agree that it is better to trust Quarq than Praxis recommendation here. However, if you strictly follow Quarq recommendation, you should use only a SRAM drivetrain:

Quarq Elsa and Riken:
Chainrings: SRAM TSM
Official Compatibility: SRAM RED, SRAM Force, SRAM Rival and SRAM Apex Front Derailleurs


As per FAQ:
I have an 11-speed drivetrain. What are my options?
We have customers successfully using the following chainrings on Quarq power meters with 11-speed drivetrains:
Rotor Q and No-Q in 130 BCD and 110 BCD
Stronglight CT2 in 130 BCD only
FSA Pro Road in 130 BCD and 110 BCD
Wick Werks in 130 BCD and 110 BCD


I personally have a Quarq Riken with 52/36 Praxis Clover rings. No problems, except for the porky weight…

That being said, my next PM will be a P2M or a Rotor PM (and Praxis rings).

r_mutt
Posts: 412
Joined: Sat Feb 23, 2008 6:33 pm

by r_mutt

my guess is that they might be "required" to suggest using SRAM drivetrain only as they are owned by SRAM, but in reality, the Riken/Elsa will work with any system - hence the move from S975 SRAM branded crankarms to Quarq branded SRAM S975 crankarms on the Elsa and Riken. i called direct to get their opinion on matters. great customer service.

User avatar
boysa
Posts: 1430
Joined: Sun May 04, 2008 10:03 pm
Location: Too far from my bike.

by boysa

Just to follow up, I called Quarq yesterday and they said with the new omnical models, either set of Praxis rings would be fine. I decided to roll the dice and give the clovers a try.

FWIW, Praxis seems to have wonderful customer service. Spoke with them, as well, and my rings should be here Friday.
"Deserve's got nothing to do with it." William Munny

wheelzqc
Posts: 266
Joined: Thu Jun 09, 2011 6:51 pm

by wheelzqc

Do all the StrongLight chainrings work well with a Quarq (Riken) ? I was looking at the Zircal model.

Post Reply