ee cycleworks brakes
Moderator: robbosmans
-
- Posts: 1736
- Joined: Tue Sep 22, 2009 1:29 pm
- Location: Paris
I've had them for about 4 years. They remain the best brakes I've ever used in terms of weight vs power vs modulation. I've never had any isues with them in tersm of reliability, they are a bit of a pain to clean, but other than that they're great.
"We live in an age when unnecessary things are our only necessities." Oscar Wilde
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
had my set for over 10000kms, awesome brakes. took me a while to warm to the look of em but that was put to rest as soon as i had them in my hot little hands..
worth every penny and the new ones with the black pivots are so nice!! do need to be cleaned a bit more than a set of DA brakes for instance but who would let a WW bike stay dirty for long any way?
worth every penny and the new ones with the black pivots are so nice!! do need to be cleaned a bit more than a set of DA brakes for instance but who would let a WW bike stay dirty for long any way?
Two years and still working fine. Mine don't get cleaned that often- I ride much more than I clean.
Compared to my previous benchmark tuned 7800 brakes they're way better- more power and modulation. I'm using Sram 2012 red levers.
I did have some problems with the return springs being too stiff. I've had some nerve problems in my left (front brake) hand after doing 5 hour rides up and down very technical descents. Actually it started when I was using a set of KCNC CB1s... The newer EE return springs were stiff enough to trigger it. So I asked Craig for a set of the softer original springs. They work fabulously- the brakes are very light, have even better feel and zero problems with brake return. The Sram levers have their own return springs and while I don't clean the bike that often I do maintain it well.
Compared to my previous benchmark tuned 7800 brakes they're way better- more power and modulation. I'm using Sram 2012 red levers.
I did have some problems with the return springs being too stiff. I've had some nerve problems in my left (front brake) hand after doing 5 hour rides up and down very technical descents. Actually it started when I was using a set of KCNC CB1s... The newer EE return springs were stiff enough to trigger it. So I asked Craig for a set of the softer original springs. They work fabulously- the brakes are very light, have even better feel and zero problems with brake return. The Sram levers have their own return springs and while I don't clean the bike that often I do maintain it well.
They're great brakes. The only cons I see to the ones I have are price of course, and maybe clearance as the arms are fairly short and fat. I had one incident where I broke a spoke on the rear wheel and when it went out of true it rubbed ferociously on the pads. I was 50 miles in to a 95 mile ride. I opened the back brake up all the way thinking that would be fine to get home. When I opened the caliper up all the way I didn't realize that the tire would then rub directly on the arm of the caliper and ended up cutting through the tire about 15 miles later. Then I just repaired the flat and tire, and took the brake off the bike and rode home with just the front brake. I don't think I would have had this problem with a brake that had longer thinner arms.
As to cleaning, yes they are more difficult to clean but I feel this is offset with not having to worry about lubing the pivot points. I think it's a wash that way. I'd buy the same brakes again if I was building a new bike.
As to cleaning, yes they are more difficult to clean but I feel this is offset with not having to worry about lubing the pivot points. I think it's a wash that way. I'd buy the same brakes again if I was building a new bike.
Great brake. No issues and I'm not exactly lightweight @ 175.
Looks???
EVERYBODY comments on them to the plus side.
Tip on cleaning. I use my home steamer and they are factory fresh clean in under two minutes with just a trace of water vapor. Actually I started to use the steamer on the entire bike. No caustic chemicals or disassembly needed and now the shop has to look elsewhere for revenue.
Looks???
EVERYBODY comments on them to the plus side.
Tip on cleaning. I use my home steamer and they are factory fresh clean in under two minutes with just a trace of water vapor. Actually I started to use the steamer on the entire bike. No caustic chemicals or disassembly needed and now the shop has to look elsewhere for revenue.
@ barsook77: I am here with mike that these brakes do look like they are designed by some ambitious new graduated "here is what I can do different" guy.
IMO best designed brakes are the DA 7900.
IMO best designed brakes are the DA 7900.
Kuota Kom Evo
viewtopic.php?f=10&t=111825&p=955235#p955235" onclick="window.open(this.href);return false;" onclick="window.open(this.href);return false;
SOLD
viewtopic.php?f=10&t=111825&p=955235#p955235" onclick="window.open(this.href);return false;" onclick="window.open(this.href);return false;
SOLD
bura wrote:@ barsook77: I am here with mike that these brakes do look like they are designed by some ambitious new graduated "here is what I can do different" guy.
IMO best designed brakes are the DA 7900.
Ya know, when I look at a new product, the first thing I ask is: How much better does it function than what I currently use?
These brakes are awesome when I'm looking for controlled bleed off of speed ripping down my Cat 1 mountaintops.
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com