2013 Merlin Extralight
Moderator: robbosmans
-
- Posts: 2
- Joined: Sat Mar 10, 2012 7:59 pm
- Location: Banff, Alberta
Has anyone else heard about this interesting revelation... 2013 re-release of the venerable Merlin Extralight?
http://www.merlinbike.com/" onclick="window.open(this.href);return false;
http://www.competitivecyclist.com/frame ... 36927.html" onclick="window.open(this.href);return false;
According to an email received the new frame design will be shown at NAHBS... anyone seen the booth?
Sounds like an interesting opportunity for lovers of the original Merlin aesthetic and ride. That said, I wonder about the visual effect of the enlarged tubing and BB. Hope to hear/see more. Meanwhile, I will keep working on my 1997 Extralight rebuild through the snowy winter. Will ask for some comments in the Spring after I figure out stem choice. Would love that new headbadge for my project.
http://www.merlinbike.com/" onclick="window.open(this.href);return false;
http://www.competitivecyclist.com/frame ... 36927.html" onclick="window.open(this.href);return false;
According to an email received the new frame design will be shown at NAHBS... anyone seen the booth?
Sounds like an interesting opportunity for lovers of the original Merlin aesthetic and ride. That said, I wonder about the visual effect of the enlarged tubing and BB. Hope to hear/see more. Meanwhile, I will keep working on my 1997 Extralight rebuild through the snowy winter. Will ask for some comments in the Spring after I figure out stem choice. Would love that new headbadge for my project.
Keith.
mtnplanner
mtnplanner
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
-
- Posts: 45
- Joined: Tue Feb 01, 2011 6:53 pm
If I recall correctly, Brendan Quirk, the founder of Competitive Cyclist bought the Merlin name a few years ago and has been working to bring back the company. Velo News has posted an image of the bike http://velonews.competitor.com/files/20 ... 33x421.jpg and from reading around it sounds like a Red stock build will be about 15.5-16lbs.
-
- Posts: 465
- Joined: Thu Sep 15, 2005 6:49 am
Is that the original Merlin Extralight geometry? I'm going from (an admittedly faulty) memory, but I seem to recall that those frames had a more Merckx Century-like design: longer TT, slacker seat angle. It stuck in my mind because that's what tends to fit me, and I was drooling over an Extralight for ages.
-
- Posts: 45
- Joined: Tue Feb 01, 2011 6:53 pm
From what I can tell it appears they are carrying over the top tube lengths from the originals, but not sure if the geometry is the same. It is interesting that they are selling them based on top tube length not the more arbitrary seat tube length... I wish more manufactures would do this.
-
- Posts: 349
- Joined: Tue Apr 27, 2010 2:36 am
- Location: Taylosville, Utah
I owned an original Merlin (pre-extralight), and sill ride a CR-Works, both Tom Kellogg designs.
The new bikes are definitely not the same.
CR-Works geometry:
http://www.tirides.com/wp/frames/road/merlin-works-cr-32-5-compact-road-frame-size-l/
New geometry: (bottom of page):
http://www.competitivecyclist.com/frame/2013-merlin-extralight-36927.html
The new bikes are definitely not the same.
CR-Works geometry:
http://www.tirides.com/wp/frames/road/merlin-works-cr-32-5-compact-road-frame-size-l/
New geometry: (bottom of page):
http://www.competitivecyclist.com/frame/2013-merlin-extralight-36927.html
They made a few tweaks from the original Kellog geometry, according to the man at the show. He didn't have specifics other than to say that the headtubes they were sourcing required it. They're a bit taller, sounds like.
Great looking frame.
Great looking frame.
VeloNews Magazine/VeloNews.com tech
How much does it weigh? The tubes look fatter than I remember.
Will the frames break like a number of the original Extralights did?
Will the frames break like a number of the original Extralights did?
- HammerTime2
- Posts: 5814
- Joined: Thu May 04, 2006 4:43 pm
- Location: Wherever there's a mountain beckoning to be climbed
As to the tubes being fatter, from the link in the first post n this thread:
http://www.competitivecyclist.com/frame/2013-merlin-extralight-36927.html wrote:And this brings us onto the subject of engineered-in rigidity. Merlin brought the Extralight into the modern age by increasing the diameter of the tubing to 1.375in at the top and seat tubes and 0.875in at the seatstays. You'll also find that this generation features a 44mm oversized head tube that's been mated with a full carbon Enve Composites fork.
- HammerTime2
- Posts: 5814
- Joined: Thu May 04, 2006 4:43 pm
- Location: Wherever there's a mountain beckoning to be climbed
Larger diameter, thinner-walled ti tubes could be lighter ti tubes.
This is a great development. An updated Extralight with a bit more stiffness around the HT especially but the similar ride quality would be a great bike. I loved mine and still do most of my riding on my Solis. I'd certainly consider getting another.
Not everything that counts can be counted. Not everything that can be counted counts.
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
- ultimobici
- in the industry
- Posts: 4462
- Joined: Sun Nov 21, 2004 2:45 pm
- Location: Trento, Italia
- Contact:
Sounds like he's talking bullocks. How can the headtube being a bit taller affect the STA, HTA & other measurement? The only effect is that your stem may require more or less spacers. Looking at the geometry now compared to Tom Kellogg's original, it looks like they've slackened the STA & HTA off by half a degree, ditched 4 sizes & dropped the BB by 4.5mm. The slacker STA has probably driven the stays being stretched by 3mm.VNTech wrote:They made a few tweaks from the original Kellog geometry, according to the man at the show. He didn't have specifics other than to say that the headtubes they were sourcing required it. They're a bit taller, sounds like.