Weight Weenies
* FAQ    * Search    * Trending Topics
* Login   * Register
HOME Listings Blog NEW Galleries NEW FAQ Contact About Impressum
It is currently Thu Feb 23, 2017 1:51 am

All times are UTC+01:00





Post new topic  Reply to topic  [ 5 posts ] 
Author Message
PostPosted: Fri Jan 17, 2014 7:19 pm 
Offline

Joined: Sun Apr 29, 2012 9:42 am
Posts: 19
I have a sram red 2013 on my cervelo s3 (2010) and I noticed my bikestore, who installed the group, did made some mistakes:

- my right crank arm is hitting my front derailleur when the chain is on the big chainring because the big chainring it to far to the outside (on the photo the chain is on the big front chainring and the smallest rear chainring) In addition to this problem: the chain is also getting off the big chainring on my crankarm when I push my (left) shifter (just a bit) too hard.
- Now I wanted to adjust the derailleur by adjusting the ''high limit screw'' (correct?) but I think the cable routing isn't correct.

My questions are:
- what do you think is wrong with the current setup?
- is the ''damage'' any big on my frame? Is it worth going back to the bikestore?
- how can I fix this?

Thx in advance
Image
cerv2 by rgrhg, on Flickr

Image
cerv1 by rgrhg, on Flickr


Top
   
PostPosted: Sat Jan 18, 2014 12:39 am 
Offline
in the industry

Joined: Fri May 20, 2011 4:51 pm
Posts: 32
Hello,
Not sure exactly what is wrong with the setup should have the bike shop who built it address the issues.
As for the carbon I can help.
We do carbon frame repairs as well as custom parts and if you are looking to have your fame repaired let us know.

_________________
Thanks
Ric R
www.concept2composite.com


Top
   
Posted: Sat Jan 18, 2014 12:39 am 


Top
   
 
PostPosted: Sat Jan 18, 2014 12:50 am 
Offline

Joined: Sun Apr 29, 2012 9:42 am
Posts: 19
Riccfs wrote:
Hello,
We do carbon frame repairs as well as custom parts and if you are looking to have your fame repaired let us know.


When you look at my first photo you can see the cable has cut itself a little bit into the frame. Do you think it is neccesary to repair this to prevent futher damage?
I hope you can answer on this as an expert, I do live in Europe so I have to thank for the offer in any case..


Top
   
PostPosted: Sat Jan 18, 2014 2:49 am 
Offline

Joined: Fri Oct 28, 2011 3:25 am
Posts: 1403
Location: United Kingdom of Great Britain and Northern Ireland
1/ You need to adjust the H Limit screw so that the front derailleur does not move so much to the outside.

2/ You need to check the routing of the cable. Does it thread through the frame properly? A bit of cosmetic damage where the cable exits the hole in the frame should not matter - you sometimes get a little damage where the cable rubs on the outside of the hole.


Top
   
PostPosted: Sat Jan 18, 2014 4:31 am 
Offline

Joined: Sat Nov 10, 2007 9:51 pm
Posts: 418
http://www.artscyclery.com/learningcent ... leurs.html

You might need to check the angle of the cable coming into the derailleur, either in front or from behind the bolt, not sure what the sram standard is


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 5 posts ] 

   Similar Topics   Author   Replies   Views   Last post 
There are no new unread posts for this topic. Ultegra front derailleur cable tension question

in Road

nemeseri

5

308

Sat Apr 23, 2016 3:48 am

Canofale View the latest post

There are no new unread posts for this topic. Fasi Niro Glide alumium brake and derailleur cable housing

in Road

tommasini

1

197

Fri Jan 13, 2017 10:07 am

micky View the latest post

There are no new unread posts for this topic. Removing gear cable tabs from a Scott CR1 Frame?

in Road

stevec1975

8

662

Wed Feb 22, 2017 5:38 pm

mike View the latest post

There are no new unread posts for this topic. Scott Addict SL Cable Stops for internal cable routing

in Road

kulivontot

3

563

Sat Sep 10, 2016 4:33 am

kulivontot View the latest post

There are no new unread posts for this topic. Damage to Zipp 303 Brake Track

in Road

justonwo

4

761

Wed Jun 01, 2016 1:35 pm

4ibanez View the latest post


All times are UTC+01:00


Who is online

Users browsing this forum: Baidu [Spider], DOUG, Ebruner, Google [Bot], JS300 and 35 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited