Page 2 of 2

Re: The Great Long Drop Brake Debate

Posted: Sun Jan 19, 2014 10:01 am
by basilic
Thanks Rick. Looks like you dremeled about 2 mm? (The initial location was not quite at the bottom of the slot)

Re: The Great Long Drop Brake Debate

Posted: Mon Jan 20, 2014 10:08 am
by Dov
Those Bdop things are $60 a bike!

That's such poor value.

Does anyone have any real world experience with the TRP RG957?
Image

Re: The Great Long Drop Brake Debate

Posted: Mon Jan 20, 2014 10:08 am
by Weenie

Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓    Broad Selection ✓    Worldwide Delivery ✓

www.starbike.com



Re: The Great Long Drop Brake Debate

Posted: Mon Jan 20, 2014 12:38 pm
by DMF
$60 for two sets is poor value? Being a small business I almost fail to see how the guy is even making a profit on these considering the workmanship and low volume. Plus I think there are some brake pads without holders out there going for more...

Re: The Great Long Drop Brake Debate

Posted: Mon Jan 20, 2014 1:20 pm
by MajorMantra
Not to mention that $60 is small beans compared to the cost of a set of DA brakes.

Re: The Great Long Drop Brake Debate

Posted: Mon Jan 20, 2014 4:31 pm
by TimW
What about these? they are what I run on my winter bike with full length mudguards. Not fantastic but cheap. Edit: hardly DA9000 level but fine for a winter bike.

http://www.wiggle.co.uk/miche-performan ... liper-set/

Re: The Great Long Drop Brake Debate

Posted: Tue Jan 21, 2014 8:21 am
by vejnemojnen
TimW wrote:What about these? they are what I run on my winter bike with full length mudguards. Not fantastic but cheap. Edit: hardly DA9000 level but fine for a winter bike.

http://www.wiggle.co.uk/miche-performan ... liper-set/


poor quality, tend to rust, their pads are killer for the rims. I'd avoid them, as they're expensive (if you buy a decent compound pad, which is a must for those brakes.)

Essentially they're the same as tektro R510, believe it or not, they even have R510 stamped on the inside of the arms.. :D

I'd go for some Campy caliper (50mm max drop instead of shimano's 49mm) sometimes just that 1mm is all you need. Or opt for Shimano Long drop calipers, or some more decent (7series) tektro..

Choice is up to you, but I'd strongly advise you to stay away from miche performance if you don't want to re-lace the rims in a few months : )

Re: The Great Long Drop Brake Debate

Posted: Tue Jan 21, 2014 8:45 am
by DMF
I'd vouch for the Shimano BR650, essentially Ultegra BR-6600. Had one in use for years and it's pretty much flawless and on par with the Ultegra (semi inofficially it is Ultegra). I reckon it could be tuned a fair bit too without resorting to the Dremel, just bolts and bits.

Re: The Great Long Drop Brake Debate

Posted: Tue Jan 21, 2014 9:16 am
by euan
And even then the Shimano R451s are surprisingly good brakes if you change the pads. You can get a pair and some Swissstop blue/greens for less than one R650