Page 1 of 1
10 spd SRAM rings with 11 speed shimano drivetrain
Posted: Fri Dec 06, 2013 2:37 am
by dmoneysworks
So as the title states, anyone know of a problem with running this combo?
Exact kit will be S975 Quarq PM w/10 spd SRAM TT rings (or a YAW one if I can find a 53 non-hidden 5th bolt) with a shimano 6870/9000 drive train (aka Ultegra di2 FD + 9000 chain).
Anyone know if this will be a "fail" or hrs of enjoyable riding?
Many topics on this. Please, use search
Re: 10 spd SRAM rings with 11 speed shimano drivetrain
Posted: Fri Dec 06, 2013 5:08 am
by Chello
It should work fine. I don't think the 11 speed chain is narrow enough to fall between the chainrings on downshifts. That's the only thing you might have to worry about.
Re: 10 spd SRAM rings with 11 speed shimano drivetrain
Posted: Fri Dec 06, 2013 5:08 am
by Weenie
Visit
starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
Re: 10 spd SRAM rings with 11 speed shimano drivetrain
Posted: Fri Dec 06, 2013 8:16 am
by Doolop
It works fine.
Re: 10 spd SRAM rings with 11 speed shimano drivetrain
Posted: Fri Dec 06, 2013 6:25 pm
by Zigmeister
As I posted in another thread, I run Sram S975 Riken w/Qrings 52/39, 9070 Di2, CN9000 chain, Sram OG1090 cassette...butter. The only thing I hear is the tire friction on the road it is so quiet and shifts amazing.
Previously used the same crank/rings with Sram Red...no issues. and DuraAce cassette, KMC/Ultegra chains.
No reason it shouldn't work. And Rotor has confirmed this also in an email I sent awhile back to them. Their Rings are 10-11spd compatible, nothing special needed. I know, a bit off your setup, but the theory goes to show that a mix/match of parts can work just fine.
Re: 10 spd SRAM rings with 11 speed shimano drivetrain
Posted: Fri Dec 06, 2013 9:26 pm
by dcpdpayne
I ran an old Force (10 speed) crank with my new Force 22 parts until my new crank came it. It didn't seem to be an issue.