Weight Weenies
* FAQ    * Search    * Trending Topics
* Login   * Register
HOME Listings Blog NEW Galleries NEW FAQ Contact About Impressum
It is currently Mon Jan 22, 2018 9:43 pm

All times are UTC+01:00





Post new topic  Reply to topic  [ 6 posts ] 
Author Message
PostPosted: Wed May 06, 2015 4:38 am 
Offline

Joined: Wed May 06, 2015 4:01 am
Posts: 2
Anyone have any idea how to route the cables on a Most Talon bar? There are 2 entry holes - one on inside and one on the outside of the bar - but both the shifter and brake lines exit from the inside of the bar. The outside entry point seems to be too extreme of an angle for the brake line but the inner entry point is too tight to run any housing. Thoughts?

PS - I literally cannot find anything online about these bars when it comes to running lines


Top
   
Posted: Wed May 06, 2015 4:38 am 


Top
   
 
PostPosted: Wed May 06, 2015 7:53 pm 
Offline

Joined: Mon May 06, 2013 6:25 pm
Posts: 355
Don't know if it's any help. But looked truth my old pictures of my old pinarello with a most handlebar, and they have done like this. It's mounted with campagnolo eps. but i think you get the idea.

Image


Top
   
PostPosted: Thu May 07, 2015 2:56 am 
Offline

Joined: Wed May 06, 2015 4:01 am
Posts: 2
Thanks - do you remember if there was a cable entry point on the outside of the bars? If so do you remember which cable was routed into it?


Top
   
PostPosted: Sat Jan 23, 2016 3:28 pm 
Offline

Joined: Thu Jun 26, 2014 1:42 pm
Posts: 50
I have the exact same problem with my rear on my pinarello/most talon bar..

It dosent look right from above when you wrap the bar tape.. Any solutions?


Top
   
PostPosted: Sun Jan 24, 2016 2:35 am 
Offline

Joined: Sat Nov 10, 2007 9:51 pm
Posts: 418
This looks like the solution

http://www.cyclechat.net/threads/most-i ... ars.23736/

follow this example


Top
   
Posted: Sun Jan 24, 2016 2:35 am 


Top
   
 
PostPosted: Tue May 10, 2016 8:56 pm 
Offline

Joined: Thu Jun 26, 2014 1:42 pm
Posts: 50
east3rd wrote:
Anyone have any idea how to route the cables on a Most Talon bar? There are 2 entry holes - one on inside and one on the outside of the bar - but both the shifter and brake lines exit from the inside of the bar. The outside entry point seems to be too extreme of an angle for the brake line but the inner entry point is too tight to run any housing. Thoughts?

PS - I literally cannot find anything online about these bars when it comes to running lines


WHAT DID YOU DO???


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 6 posts ] 

   Similar Topics   Author   Replies   Views   Last post 
There are no new unread posts for this topic. Cable routing tips for a Di2 newbie

in Road

simurs4

3

798

Tue Feb 28, 2017 4:50 am

jlok View the latest post

There are no new unread posts for this topic. Attachment(s) Routing rear brake cable

[ Go to page: 1 2 ]

in Road

Lightweenie

19

931

Wed Nov 29, 2017 10:27 am

Fiery View the latest post

There are no new unread posts for this topic. Stems with internal cable routing

in Road

murphyk

5

1230

Fri Oct 13, 2017 4:14 pm

kode54 View the latest post

There are no new unread posts for this topic. Campag shifters: which is the best gear cable routing to use?

in Road

wilwil

2

212

Thu Jan 11, 2018 11:41 pm

Calnago View the latest post

There are no new unread posts for this topic. Finishing handlebar tape with RS910 handlebar junction connector

in Road

raggi

9

1627

Wed Aug 02, 2017 4:28 pm

dfischer1 View the latest post


All times are UTC+01:00


Who is online

Users browsing this forum: prebsy, Sammutd88, TheDoctor, ThunderJack07 and 42 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited