Weight Weenies
http://weightweenies.starbike.com/forum/

2 cranks or cannondale spidering
http://weightweenies.starbike.com/forum/viewtopic.php?f=3&t=121050
Page 1 of 1

Author:  prebsy [ Fri Nov 22, 2013 5:53 pm ]
Post subject:  2 cranks or cannondale spidering

I plan on switching to garmin vectors which frees up my crankset choices. I want to have the flexibility to switch between compact and standard cranks on my caad10. Right now I am considering a sisl2 with 2 spiderings or 2 red exograms. Sisl2 offers better performance but is a bit more expensive. So what would you do?

Author:  headwind816 [ Fri Nov 22, 2013 7:16 pm ]
Post subject:  Re: 2 cranks or cannondale spidering

The SLSI2 cranks will require special tools, which means more money out of pocket to secure those tools. Personally, I would go Exogram compact and buy two sets of rings: 52/36 and 50/34 assuming you wanted the latter.

Author:  Weenie [ Fri Nov 22, 2013 7:16 pm ]
Post subject:  Re: 2 cranks or cannondale spidering


Author:  JensW [ Sat Nov 23, 2013 10:35 am ]
Post subject:  Re: 2 cranks or cannondale spidering

but at the same time, considering the price on the sisal2 arms, the "special" tool you need (it´s just one) isn't so pricy

Author:  upside [ Sat Nov 23, 2013 2:47 pm ]
Post subject:  Re: 2 cranks or cannondale spidering

Yup, easy Hollowgram

Author:  btompkins0112 [ Sat Nov 23, 2013 2:49 pm ]
Post subject:  Re: 2 cranks or cannondale spidering

CAAD10? Hollowgram, no question. I fought it for a while, but it's money well spent on the cranks made for your frame.

Author:  Dammit [ Sat Nov 23, 2013 6:02 pm ]
Post subject:  Re: 2 cranks or cannondale spidering

If you get the Hollowgram then I'll sell you my Hollowgram SRM and PC-7 for the same price as the vector

Author:  jockster [ Sun Nov 24, 2013 2:28 pm ]
Post subject:  Re: 2 cranks or cannondale spidering

I like the Rotor cranks which have removable spiders and comes in both 110 and 130 BCD versions

Author:  TheDoc [ Sun Nov 24, 2013 8:17 pm ]
Post subject:  Re: 2 cranks or cannondale spidering

Hollowgram

Author:  prebsy [ Mon Nov 25, 2013 3:26 pm ]
Post subject:  Re: 2 cranks or cannondale spidering

Sounds like I will get the spidering. It should work with my old si arms and si spindle correct?

Author:  Danza [ Mon Nov 25, 2013 6:10 pm ]
Post subject:  Re: 2 cranks or cannondale spidering

yes IIRC

Author:  NiFTY [ Sat Nov 30, 2013 3:59 am ]
Post subject:  Re: 2 cranks or cannondale spidering

Yep to spiderings working with old si crank and spindle.

If going with hollowgrams why not the cannondale stages si crank arm. 170g on my scale for 172.5. Half price of vectors, less weight, no increase in q factor.

If removing spidering you will need 2 sets of tools. The 2 piece crank arm puller, and the lockring removal/installation tool.

Author:  prebsy [ Sat Nov 30, 2013 10:34 pm ]
Post subject:  Re: 2 cranks or cannondale spidering

stages is very light but it isn't a good power meter. It looks like I will be sticking with my hollowgram SRM for now since nothing sells during the winter.

Author:  Weenie [ Sat Nov 30, 2013 10:34 pm ]
Post subject:  Re: 2 cranks or cannondale spidering


Page 1 of 1 All times are UTC+01:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/