Garmin Vector Usage

Back by popular demand, the general all-things Road forum!

Moderator: robbosmans

Enda Marron
Posts: 383
Joined: Sun Nov 10, 2002 6:03 pm
Location: Belfast

by Enda Marron

Right now for some really bad news!
On top of not getting them to function properly, I decided to tighten them up just that little bit more.... and the alloy housing on the pod sheared :(
So I had to contact my brothers and am now beginning the no doubt lengthy and probably costly process of sending them back to the point of sale (I've dealt with them before and they are good) and waiting for Garmin to repair or replace.
On the positive side the alloy housing does appear to be quickly and easily replaceable (a wee bit like a gear hanger - which reminds me that a mate bust his gear hanger on his brand new Specialised carbon CX bike on Sunday on the second lap).
Needless to say I am even unhappier now

michaelten
Posts: 60
Joined: Thu Oct 24, 2013 11:08 pm

by michaelten

If you have broken the pod you either didnt have enough washers under it to space it out or you let it rotate around into the crank arm. The pods are available to purchase individually.

by Weenie


Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓    Broad Selection ✓    Worldwide Delivery ✓

www.starbike.com



Buffalo
Posts: 89
Joined: Mon Oct 24, 2011 5:13 am

by Buffalo

I think you should show us some pics.

Causidicus
Posts: 320
Joined: Tue Apr 17, 2012 11:20 am

by Causidicus

.
Last edited by Causidicus on Tue Jun 17, 2014 11:18 pm, edited 1 time in total.

Enda Marron
Posts: 383
Joined: Sun Nov 10, 2002 6:03 pm
Location: Belfast

by Enda Marron

is there a simple and straight forward way to post the sad pictures?

fitty4
Posts: 370
Joined: Mon Jul 13, 2009 9:19 pm
Location: Denmark

by fitty4

Enda Marron wrote:is there a simple and straight forward way to post the sad pictures?


11 years it is about time you learn :)

for big photos I use imageshack, upload pic. to imageshack, go to folder in IS, rightclick share, copy all text where it says forums and post here

Enda Marron
Posts: 383
Joined: Sun Nov 10, 2002 6:03 pm
Location: Belfast

by Enda Marron

I cant be bothered going through all that Flickr, Imageshack stuff, so I'll spare you all the sad pictures

kulivontot
Posts: 1163
Joined: Sun May 16, 2010 7:28 pm

by kulivontot

But you'll take the time to post that you're not posting...

VNTech
Posts: 195
Joined: Tue Jan 25, 2011 8:08 pm

by VNTech

As michael said above, the only way to break the pod when torqueing down the pedals (unless you go at them with a five foot breaker bar) is if you have insufficient spacers behind it, or did during some previous installation attempt. This would also explain the bad readings.

Likely diagnosis: user error. Go pick up some new pods and put more pedal washers behind them.
VeloNews Magazine/VeloNews.com tech

Enda Marron
Posts: 383
Joined: Sun Nov 10, 2002 6:03 pm
Location: Belfast

by Enda Marron

The new pod is on its way!

The retailer; Wheelbase Cycles in Cumbria (England) were excellent.
I did not go down the road of arguing warranty - I supplied the sad photos of the broken pod and within minutes Toby called me to tell me that the new pod should be with me by Tuesday (it cost £40)
Meantime I have asked a mate who is a good engineer/gadget boffin to install them [he is reading this thread, the Garmin Forum and the Garmin YouTube channel].
We will check
Hopefully things will go smoothly second time around

User avatar
djconnel
Posts: 7917
Joined: Wed Sep 26, 2007 1:57 pm
Location: San Francisco, CA
Contact:

by djconnel

WRT issues with SRM: SRM is more expensive, heavier, doesn't have L-R power, and has no prospects for future pedal stroke analysis. If none of this is important to you, then by all means go with SRM. Vector's doing something different, serving different goals.


bricky21
Posts: 1403
Joined: Tue Sep 14, 2010 3:28 pm

by bricky21

:lol:

Enda Marron
Posts: 383
Joined: Sun Nov 10, 2002 6:03 pm
Location: Belfast

by Enda Marron

The new pod arrived yesterday and I got an engineer cycling mate to help me re-fit the pedals. He is very good and really for "We" read "He"
It was quite straightforward - we just followed the instructions as per the Garmin video.
When we tried them they continued to drop out and he soon got to the bottom of it.
Basically I have fitted the Vectors to my indoor bike (I can only get out on the road on Sundays over the dark Winter months so most of my Winter training is on the turbo & rollers).
This bike is is fitted with old Campagnolo Mirage 8 speed drive-train, and the cranks are too thick and the connectors to the pod were losing contact. This problem appears to be solved by some careful filing of the cranks and torqueing of the pedals.
We also noticed that, as the cranks are so old that there is a bit of wear on the cranks at the pedal spindle/crank interface. We think that this uneven wear may means that the spindle/crank interface is not sufficiently flush and that this leads to very slight slippage of the pods - especially at higher work intensities - and this may cause fluctuations in the power readings.
I will test the whole thing tonight on the rollers (plan is a 1 hour "TT") and see how it goes
If the problems of drop out and fluctuations in readings persist we have a series of solutions lined up. These range from trying gasket paper through to latheing the cranks.
I'll report back

by Weenie


Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓    Broad Selection ✓    Worldwide Delivery ✓

www.starbike.com



User avatar
ergott
Posts: 2870
Joined: Tue Apr 18, 2006 3:03 am
Location: Islip, NY
Contact:

by ergott

Just get an inexpensive but new crank for the bike. Doesn't even have to be new. Those pedals are too expensive to muck up on an old crank like that.

Post Reply