Shimano 105 5600 STI faulty finish.

Discuss light weight issues concerning road bikes & parts.
Post Reply
User avatar
alanjob
Posts: 59
Joined: Fri Mar 06, 2009 1:13 pm
Location: Northern Ireland

by alanjob

Hey Guys.

Next issue I have with my winter/training bike is my 105 STI leaves have some funky marks on the levers.
The lines seam to be some sort of corrosion and the finish is flaking away.

Pic:
Image

As you can see there is some damage to the plastic housing but none to the levers.
Bike has been stored in a dry garage for 2-3 years and they went like this.

I was thinking of dismantling them and getting them anodised.
But going to return them to the dealer for a quote to fix first.

Anyone experienced this or any cool ideas on how to reuse them.

Alan

by Weenie


User avatar
alanjob
Posts: 59
Joined: Fri Mar 06, 2009 1:13 pm
Location: Northern Ireland

by alanjob

Hi, Just found someone else with the same issue.

http://weightweenies.starbike.com/forum/viewtopic.php?f=3&t=30361&hilit=Corrosion+105

looks to be from a faulty batch.

Alan

odin99
Posts: 187
Joined: Wed Feb 16, 2011 7:46 pm

by odin99

i've seen this quite a bit of shimano levers... mostly the 9 speed era stuff though that's been around longer - ultegra and 105... maybe it is from sweat penetrating through the anodize and causing corrosion?

PJCM
Posts: 185
Joined: Sun Apr 15, 2007 6:44 am

by PJCM

I've encountered this on a couple of bikes and buffed back to clean metal using a combination of a rotary brass brush stripper and steel wool. Then Autosol paste for a final polish.

The exposed surface is still prone to corroding (but not the creeping lines as per the pic above) and can be repeatedly cleaned up again without too much effort. Applying automotive or marine wax helps keep them shiny for longer.

Hasn't happened on Campag alloy levers which seem to have a milky anodisation treatment that is pretty tough.

User avatar
alanjob
Posts: 59
Joined: Fri Mar 06, 2009 1:13 pm
Location: Northern Ireland

by alanjob

Hey guys,

The only thing the local bike shop could do is give me 10% discount of a new pair of STI levers.
(treated myself to a pair of new 105 STI's)
And I got nowhere with Shimano.

So... I dismantled the levers and sanded them down and polished them.

Image

Then I found a local anodizer through a friend and got them anodized.
(They came out dark due to the levers being cast aluminium)

Image

https://lh4.googleusercontent.com/-DeBwCtwMVho/UoawD_EmeFI/AAAAAAAAAXc/6YDcHDtWGUo/w500-h666-no/IMG_5205.JPG

They will do great for my fiancée's bike, if I ever pick one up, I can convert it to 10 Speed.

Alan
Last edited by alanjob on Mon Nov 18, 2013 10:33 pm, edited 2 times in total.

OwenJames
Posts: 166
Joined: Mon Apr 11, 2011 3:16 pm

by OwenJames

Nice work. What did you do the initial clean up with?

User avatar
alanjob
Posts: 59
Joined: Fri Mar 06, 2009 1:13 pm
Location: Northern Ireland

by alanjob

OwenJames wrote:Nice work. What did you do the initial clean up with?


Hi, various gains of sandpaper (1200 to finish) then autosol metal polish.

Alan

by Weenie


Post Reply
  • Similar Topics
    Replies
    Views
    Last post