SRAM Red 2013 with older cranks

[Peter_E]

Hi, I have SRAM red cranks w Stronglight CT2 rings (50/39) on my bike. Rest of the group is Campagnolo 10 Speed. It works great bit the campy stuff is getting a bit old. Considering getting some used 10 speed SRAM red stift next year. Will teh group from 2013 w yaw derailleur sork with those cranks? I seem to recall something about different spacing of the rings on 2013 cranks?

Skickat från min Nexus 7 via Tapatalk 2

[Frankie - B]

I use it myself, works fine.

[madcow]

I'm using the Red22 stuff with a pair of EE prototypes which were built for 10 speed Shimano and it works really well.

[CharlesM]

The 2012 / 13 front Der works really well.

That said, if by "older" you mean 2011 Red or older, the chain rings will not be as high quality as 2012-13 (and or Praxis in the case that's what is on the EE).

Pre 2012 will work, but chain pick up has a little lag.

[kbzoo]

I'm using the 2013 Red with a Zipp Vuma Quad crank and it works fine.

[Peter_E]

Thanks guys.

Skickat från min MT15i via Tapatalk 2

[fogflip]

Should work you can get some yaw rings for your old crank set I did that with my Quarq elsa...