Weight Weenies
* FAQ    * Search    * Trending Topics
* Login   * Register
HOME Listings Blog NEW Galleries NEW FAQ Contact About
It is currently Thu May 26, 2016 1:34 pm
Recently the board software has been updated and there are some known bugs/failures:
- Avatars are currently not being displayed ✔ FIXED
- Tapatalk connection is currently broken ✔ FIXED

If you find more errors please post it here: http://weightweenies.starbike.com/forum/viewtopic.php?f=7&t=139062


All times are UTC+01:00





Post new topic  Reply to topic  [ 1 post ] 
Author Message
PostPosted: Mon Nov 04, 2013 3:56 pm 
Offline

Joined: Sun Feb 22, 2009 12:31 pm
Posts: 56
Location: Brisbane, Australia
Hi guys,

I have a question about the wire running from junction B to the battery for 7970 Di2.


Let me explain my situation:

My old bike (Addict SL) was running the full external wiring harness, with an internal seat post battery (bought from eBay seller 'eapathome'). To achieve this I cut the battery wire, and soldered red-red and black-black to the internal battery. The wire was run through the drain hole at the bottom and rear side of the seat tube, found on most Addict frames. This worked perfectly.

My newest bike (S-Works Venge) is now running the full internal wiring kit (EW-7975). I have cut the wire running from the battery holder to the internal connection (with the 6.5mm non-waterproof 4 pin connector) with the intention of soldering the plug (and run of wire still attached) to the wire from my internal battery.

Upon stripping this wire, I have found that it contains 2 red, and 2 black wires within it. This is different to the external harness battery wire which only contains 1 red and 1 black.

My dilemma:

I need to know which pins require power from the battery and thus which wires should I connect my battery to.

The options are either to join my internal battery wire to either one, or both wires at the same time.

At this stage I'm not willing to touch wires and 'see how it goes' so I thought I'd see if anybody has has experience with this.

My next step is to buy a multimeter and try and determine which wires go where, both around the harness itself and to which pin at the internal battery connector.

Thanks,

Tom

:beerchug:


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 1 post ] 

   Similar Topics   Author   Replies   Views   Last post 
There are no new unread posts for this topic. Di2 7970 battery plug wiring

[ Go to page: 1 2 ]

in Road

drmutley

16

759

Wed Aug 19, 2015 3:29 pm

drmutley View the latest post

There are no new unread posts for this topic. Sidi wire air Vs Fizik R1B Vs Rapha GT

[ Go to page: 1 2 ]

in Road

snowdevlin

17

1311

Thu Mar 24, 2016 11:05 am

snowdevlin View the latest post

There are no new unread posts for this topic. C60 dropout, Di2 wire and a problem with CycleOps trainer :(

in Road

showdown

0

413

Mon Jun 01, 2015 3:09 pm

showdown View the latest post

There are no new unread posts for this topic. Attachment(s) Internal or external DI2 battery

in Road

muntos

14

1091

Sat Jan 16, 2016 1:40 pm

garlet View the latest post

There are no new unread posts for this topic. SRM Powermeter battery status

in Road

claus

0

449

Sat Aug 29, 2015 4:41 am

claus View the latest post


All times are UTC+01:00


Who is online

Users browsing this forum: Baidu [Spider], Gavf, MSNbot Media, Yahoo [Bot] and 30 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited