Why you need to inspect carbon. ( Carbon failure)
Moderator: robbosmans
looks like delamination with some stress fractures. it that hole caused by rocks/debris hitting and getting stuck up there?
good thing you checked. count your lucky stars.
good thing you checked. count your lucky stars.
- Factor Ostro VAM Disc
- Factor LS Disc
- Specialized Aethos Disc
- Sturdy Ti Allroad Disc
- Guru Praemio R Disc
- Factor LS Disc
- Specialized Aethos Disc
- Sturdy Ti Allroad Disc
- Guru Praemio R Disc
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
2 things
to me the pic looks like the underside of just about every carbon fork that gets ridden a lot.
the amount of material around that area on an Alpha Q in that area is very thick. 10mm or more. Are you saying the hole goes through the wall?
to me the pic looks like the underside of just about every carbon fork that gets ridden a lot.
the amount of material around that area on an Alpha Q in that area is very thick. 10mm or more. Are you saying the hole goes through the wall?
Juanmoretime wrote:Nick, that is correct. I cac see the front brake bolt thru one of the holes. I've never had a rock wedge in it either.
scary...
- coloclimber
- Moderator
- Posts: 2875
- Joined: Wed Aug 23, 2006 9:11 pm
- Location: People's Republic of Boulder
I am glad the bike is okay (and you as well). An ounce of prevention...
-Deacon Doctor Colorado Slim
-
- Posts: 479
- Joined: Sun Nov 14, 2010 10:25 pm
^ Darwin award of the year for this character.
I could see that sort of thing happening if you're running 25c tires (or bigger). I had an older 3t fork that just couldnt take a 25 without the sand and grit rubbing the fork right at that same spot. You can see plenty of scratches leading to that center area which would imply the same type of damage. Just a thought.
Casati Vola SLi and Dolan Preffisio
viewtopic.php?f=10&t=108931" onclick="window.open(this.href);return false;"
btompkins0112 wrote:
It has the H2 geo......one step racier than a hybrid bike
viewtopic.php?f=10&t=108931" onclick="window.open(this.href);return false;"
btompkins0112 wrote:
It has the H2 geo......one step racier than a hybrid bike
progetto wrote:( I'd patch it up with a couple layers of cloth and resin and call it good. )
Then put that sucker on ebay, no one will ever know.
No, but I'd happily ride it.
Seriously, has anyone heard of a fork breaking in that location? Looks like erosion rather than a structural crack.
First, I'd try to pull the blades apart... and if that doesn't produce any strange sounds then patch it up. That's how they'd fix it if you sent it somewhere anyway.
formerly rruff...
Juanmoretime wrote:Nick, that is correct. I cac see the front brake bolt thru one of the holes. I've never had a rock wedge in it either.
The photo doesn't do it justice then. Just looks delaminated. Cosmetic.
Juanmoretime wrote:I've never had a rock wedge in it either.
...an actual hole doesn't just happen from carbon delamination. Even if a rock never got wedged in there u could have hit a rock that got shot onto the underside or a nail or other sharp object. Carbon doesn't just disintegrate and fade away leaving a hole that appears like a puncture wound. EM3
______________
Seven years seem pretty good to me for a non-coated carbon fork.
Both UV radiation and moisture have adverse effects on the mechanical properties of the polymeric epoxy matrix, while the carbon fibers are not affected significantly by either environment. The polymer matrix in a fiber-reinforced composite serves to transfer the loads to the reinforcing fibers and provide shear strength. Its not the non-coated carbon but the non-coated epoxy that leads to reduced damage tolerance and lack of long-term durability. But really seven years is good, consider the flat a blessing.
Both UV radiation and moisture have adverse effects on the mechanical properties of the polymeric epoxy matrix, while the carbon fibers are not affected significantly by either environment. The polymer matrix in a fiber-reinforced composite serves to transfer the loads to the reinforcing fibers and provide shear strength. Its not the non-coated carbon but the non-coated epoxy that leads to reduced damage tolerance and lack of long-term durability. But really seven years is good, consider the flat a blessing.
- Powerful Pete
- Moderator
- Posts: 4132
- Joined: Fri Dec 10, 2004 10:22 am
- Location: Lima, Peru and the Washington DC area - it's complicated.
1. I would not ride it. Life is really too short for that.
2. No comment on how it may have happened. No idea.
3. Good to see you are safe and that it was caught in time, Juan.
2. No comment on how it may have happened. No idea.
3. Good to see you are safe and that it was caught in time, Juan.
Road bike: Cervelo R3, Campagnolo Chorus/Record mix...
Supercommuter: Jamis Renegade...
Oldie but goodie: De Rosa Professional Slx, Campagnolo C-Record...
And you can call me Macktastik Honey Pete Kicks, thank you.
Supercommuter: Jamis Renegade...
Oldie but goodie: De Rosa Professional Slx, Campagnolo C-Record...
And you can call me Macktastik Honey Pete Kicks, thank you.
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com