HOT: Active* forum members generally gain 5% discount at starbike.com store!
Weight Weenies
* FAQ    * Search    * Trending Topics
* Login   * Register
HOME Listings Articles FAQ Contact About




Post new topic Reply to topic  [ 15 posts ] 
Author Message
 Post subject: Evo BB tools
PostPosted: Mon Oct 14, 2013 2:57 pm 
Offline

Joined: Mon Apr 11, 2011 3:16 pm
Posts: 166
Hey

So, I want to get a complete set of tools in order to service or replace the BB on my Evo.

I have the SiSL2 cranks and BB set installed.

So, what would I need to extract, and re-install the cranks and BB, tool wise?

I was thinking-

-Extracter
-something to get the bearings and cups out
-something to get them back in straight!

Any ideas, knowledge, or suggestions for what I need to buy, and what I should look out for?

Thanks in advance.


Top
 Profile  
 
 Post subject: Evo BB tools
Posted: Mon Oct 14, 2013 2:57 pm 


Top
  
 
 Post subject: Re: Evo BB tools
PostPosted: Mon Oct 14, 2013 3:02 pm 
Offline

Joined: Tue Sep 20, 2011 12:54 pm
Posts: 395
Location: Haines, AK - Temporarily
I use a Park Bearing Press (HHP-3) and BBT-30.3 removal tool.
http://www.parktool.com/blog/repair-hel ... nd-removal


Top
 Profile  
 
 Post subject: Re: Evo BB tools
PostPosted: Mon Oct 14, 2013 3:07 pm 
Offline

Joined: Mon Apr 11, 2011 3:16 pm
Posts: 166
And these work ok on BB30 (or whatever it is they are calling what I have installed in my frame)


Top
 Profile  
 
 Post subject: Re: Evo BB tools
PostPosted: Mon Oct 14, 2013 3:08 pm 
Offline

Joined: Tue Sep 20, 2011 12:54 pm
Posts: 395
Location: Haines, AK - Temporarily
Yes, I used them on my EVO's bearings. I haven't removed the cups yet, there's another tool for that - but I can't recall the part number.


Top
 Profile  
 
 Post subject: Re: Evo BB tools
PostPosted: Mon Oct 14, 2013 3:11 pm 
Offline

Joined: Tue Sep 20, 2011 12:54 pm
Posts: 395
Location: Haines, AK - Temporarily
rijndael wrote:
I haven't removed the cups yet, there's another tool for that - but I can't recall the part number.

http://www.parktool.com/product/head-cup-remover-rt-1


Top
 Profile  
 
 Post subject: Re: Evo BB tools
PostPosted: Mon Oct 14, 2013 3:15 pm 
Offline

Joined: Mon Apr 11, 2011 3:16 pm
Posts: 166
Thanks, will check it all out. Any issue getting the bb in straight, or did it go in ok?


Top
 Profile  
 
 Post subject: Re: Evo BB tools
PostPosted: Mon Oct 14, 2013 3:19 pm 
Offline

Joined: Tue Sep 20, 2011 12:54 pm
Posts: 395
Location: Haines, AK - Temporarily
My cups were reamed by the shop when doing the initial build. I just removed the bearings and reinstalled them, it was simple and painless.


Top
 Profile  
 
 Post subject: Re: Evo BB tools
PostPosted: Mon Oct 14, 2013 3:27 pm 
Offline

Joined: Mon Apr 11, 2011 3:16 pm
Posts: 166
Reamed? The Evo has a carbon BB shell. What BB did you install?


Top
 Profile  
 
 Post subject: Re: Evo BB tools
PostPosted: Mon Oct 14, 2013 3:28 pm 
Offline

Joined: Tue Sep 20, 2011 12:54 pm
Posts: 395
Location: Haines, AK - Temporarily
The BB shell is carbon, but the pre-installed PF30 cups are aluminum. I don't know what tool they, but Park sells one.

I'm using Hawk Racing bearings.


Top
 Profile  
 
 Post subject: Re: Evo BB tools
PostPosted: Mon Oct 14, 2013 3:33 pm 
Offline

Joined: Mon Apr 11, 2011 3:16 pm
Posts: 166
Ah, so you bought the Evo as a frame, which had empty PF30 cups in it?


Top
 Profile  
 
 Post subject: Re: Evo BB tools
PostPosted: Mon Oct 14, 2013 3:38 pm 
Offline

Joined: Tue Sep 20, 2011 12:54 pm
Posts: 395
Location: Haines, AK - Temporarily
I got the frame through their frame upgrade program. I traded in a CAAD9.

Yes, it came with empty cups pre-installed.


Top
 Profile  
 
 Post subject: Re: Evo BB tools
PostPosted: Mon Oct 14, 2013 3:52 pm 
Offline

Joined: Mon Apr 11, 2011 3:16 pm
Posts: 166
OK. Mine has the sisl2 bb installed. I doubt the bearings will come out without the cups, so I will be pressing the cups in myself. What cranks are you using?


Top
 Profile  
 
 Post subject: Re: Evo BB tools
PostPosted: Mon Oct 14, 2013 3:55 pm 
Offline

Joined: Tue Sep 20, 2011 12:54 pm
Posts: 395
Location: Haines, AK - Temporarily
SRAM Red Quarq


Top
 Profile  
 
 Post subject: Re: Evo BB tools
PostPosted: Wed Oct 16, 2013 4:43 pm 
Offline
User avatar

Joined: Fri Jul 23, 2004 8:24 pm
Posts: 1551
Location: Houston, Texas
rijndael wrote:
The BB shell is carbon, but the pre-installed PF30 cups are aluminum.
Unless Cannondale has made a change, the PF30 bottom bracket cups have typically been made from Delrin (SRAM) where as the alloy bearing cups were usually spec'd for when installing an SRM Hollowgram powermeter.

_________________
Michael - The Anaerobic Threshold is neither...


Top
 Profile  
 
 Post subject: Re: Evo BB tools
PostPosted: Wed Oct 16, 2013 5:54 pm 
Offline

Joined: Tue Sep 20, 2011 12:54 pm
Posts: 395
Location: Haines, AK - Temporarily
ms6073 wrote:
Unless Cannondale has made a change, the PF30 bottom bracket cups have typically been made from Delrin

Here is my 2013 EVO's BB, post reaming, with the cups Cannondale supplied.

Image


Top
 Profile  
 
 Post subject: Re: Evo BB tools
Posted: Wed Oct 16, 2013 5:54 pm 


Top
  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 15 posts ] 


Who is online

Users browsing this forum: Bing [Bot], bontie, Exabot [Bot], Marin, mpower, racingcondor, RRsport and 29 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  

   Similar Topics   Author   Replies   Views   Last post 
There are no new unread posts for this topic. The New Park Threaded BB Tools

in Road

Valbrona

6

559

Wed Sep 24, 2014 1:07 pm

afalts View the latest post


It is currently Fri Nov 28, 2014 1:41 pm

All times are UTC + 1 hour




Advertising   –  FAQ   –  Contact   –  Convert   –  About

© Weight Weenies 2000-2013
hosted by starbike.com


How to get rid of these ads? Just register!


Powered by phpBB