Weight Weenies
* FAQ    * Search    * Trending Topics
* Login   * Register
HOME Listings Blog NEW Galleries NEW FAQ Contact About
It is currently Sun May 01, 2016 1:05 pm
Recently the board software has been updated and there are some known bugs/failures:
- Avatars are currently not being displayed ✔ FIXED
- Tapatalk connection is currently broken ✔ FIXED

If you find more errors please post it here: http://weightweenies.starbike.com/forum/viewtopic.php?f=7&t=139062


All times are UTC+01:00





Post new topic  Reply to topic  [ 31 posts ]  Go to page 1 2 3 Next
Author Message
 Post subject: Ventoux vs Hyperon
PostPosted: Sat Dec 10, 2011 12:53 pm 
Offline

Joined: Tue Nov 23, 2010 9:08 pm
Posts: 449
I am looking at a set of new general use, non-aero wheels. Hyperon Ultras and Lightweight Ventoux Gen 2 can be had for the same price, but which should I choose?

I already own a set of Hyperons and Gen 3 Lightweight Standards, so I fundamentally understand the servicing/rebuildability pros and cons. Having recently crashed a Hyperon rear, the rebuildability debate is somewhat irrelevant since I bought a whole new set of wheels cheaper than the replacement parts. To me, therefore, they are both pretty much disposable in the event of a crash. The theory of Campagnolo rebuildability is not backed up by the availability and price of spare parts.

My questions is mainly about ride quality, whether the current spec Hyperon is better or worse than the previous spec Ventoux, and whether the Gen 2 Ventoux that much less a wheel than the Gen 3?

I have narrowed my choice down to these 2, so no 'you could build some ENVEs for that price' comments please because at the prices I am looking at, you couldn't.


Top
   
 Post subject: Re: Ventoux vs Hyperon
PostPosted: Sat Dec 10, 2011 2:09 pm 
Offline

Joined: Tue Jun 17, 2008 7:46 pm
Posts: 1199
Location: Denmark
Out of those two, i would definetly go for the LW's. But that is purely for the Bling factor, as I can not comment on how either of those wheelsets ride.


Top
   
 Post subject: Re: Ventoux vs Hyperon
PostPosted: Sat Dec 10, 2011 4:42 pm 
Offline
User avatar

Joined: Sun Apr 15, 2007 5:10 am
Posts: 1035
Location: South Florida
Like you, I already have a set of standards III. I bought a set of Hyperons used and use them frequently. I had the same question as you and ultimately decided to stay with the Hyperon instead For the bling, yes, the Ventoux wins. However, it is a huge waste given you won't be able to tell a darn difference between them and the Standards. My opinion at least.


Top
   
 Post subject: Re: Ventoux vs Hyperon
PostPosted: Sat Dec 10, 2011 11:25 pm 
Offline
Tubbie Guru

Joined: Tue May 03, 2005 2:20 am
Posts: 5835
Location: Belgium
Hi,

I absolutely agree. Even a Corima Winium should be considered unless you're in the U.S....

Ciao, ;)

_________________
Being a snob is an expensive hobby.


Top
   
 Post subject: Re: Ventoux vs Hyperon
PostPosted: Sat Dec 10, 2011 11:36 pm 
Offline
User avatar

Joined: Sun Apr 15, 2007 5:10 am
Posts: 1035
Location: South Florida
Seriously, the Hyperons are awesome and as bullet proof as it gets. Couple that with the Standard III and you have the best combo there is. Again, simply in my opinion. :beerchug: :mrgreen: :beerchug:


Top
   
 Post subject: Re: Ventoux vs Hyperon
PostPosted: Sat Dec 10, 2011 11:48 pm 
Offline
Tubbie Guru

Joined: Tue May 03, 2005 2:20 am
Posts: 5835
Location: Belgium
Hi,

We must be growing up on the same wine, or vine....Whatever. :lol:

To those that don't want to spent the "plata" for the Hyperons, try to score a set of Neutrons for tubulars.
Fit a couple of Veloflex Carbons and enjoy the magical mystery tour..... 8)

Hey, you can even fit a set of Conti Comps. They'll still be comfy if you go easy on that pump.

Ciao, ;)

_________________
Being a snob is an expensive hobby.


Top
   
 Post subject: Re: Ventoux vs Hyperon
PostPosted: Sat Dec 10, 2011 11:53 pm 
Offline
User avatar

Joined: Sun Apr 15, 2007 5:10 am
Posts: 1035
Location: South Florida
fdegrove wrote:
Hi,

We must be growing up on the same wine, or vine....Whatever. :lol:

To those that don't want to spent the "plata" for the Hyperons, try to score a set of Neutrons for tubulars.
Fit a couple of Veloflex Carbons and enjoy the magical mystery tour..... 8)

Hey, you can even fit a set of Conti Comps. They'll still be comfy if you go easy on that pump.

Ciao, ;)


Given I've been training my liver on wine all afternoon, this is way more fitting than you'll even know :smartass: :mrgreen: :smartass:


Top
   
 Post subject: Re: Ventoux vs Hyperon
PostPosted: Sun Dec 11, 2011 1:02 pm 
Offline

Joined: Fri Jul 25, 2008 8:51 pm
Posts: 244
Location: London
I've got a set of Hyperon Ultra clinchers that I picked up off WW for a grand and use to train on as well as a set of LW Ventoux Gen III's.

I can hardly separate them. They're both amazing.

I've never ridden a Gen II but I've been told there is quite a difference in stiffness between the Gen II and III. if that was the case I'd go the Hyperon because it's faultless.


Top
   
 Post subject: Re: Ventoux vs Hyperon
PostPosted: Sun Dec 11, 2011 1:36 pm 
Offline

Joined: Sat Aug 27, 2011 3:26 am
Posts: 396
Location: Sydney, Australia
solarider wrote:
I am looking at a set of new general use, non-aero wheels........


I don't really think that there is anything "general use" about either of those wheelsets.


Top
   
 Post subject: Re: Ventoux vs Hyperon
PostPosted: Sun Dec 11, 2011 2:06 pm 
Offline

Joined: Fri Jul 25, 2008 8:51 pm
Posts: 244
Location: London
jsinclair wrote:
solarider wrote:
I am looking at a set of new general use, non-aero wheels........


I don't really think that there is anything "general use" about either of those wheelsets.


Granted, they are prohibitively expensive for most, but if you can afford them then there is no reason why they shouldn't be considered every-day wheels. I can assure you, in terms of strength, they're up to it. I've used nothing but Campag carbon and LW wheels for over a decade now for both racing and training. I've ridden some of the worst roads in both London and Sydney as well as countless trips to the Pyrenees and the Alps and they've stood up to anything I can throw at them.

So I guess from that perspective they are very much general use.

What's more, I don't see any use in heading out on a set of "average" wheels only to keep my "race wheels" in the garage for a rainy day.


Top
   
 Post subject: Re: Ventoux vs Hyperon
PostPosted: Sun Dec 11, 2011 2:43 pm 
Offline

Joined: Tue Nov 23, 2010 9:08 pm
Posts: 449
You are only here once. I don't "train" as such anymore, as I don't race. I just "ride" and I want to enjoy my time on the bike as much as possible. Why not ride nice wheels all of the time? If I was seriously training for something I might want a heavier wheel for resistance, but life's too short. So, yes, they are general use in terms of not being deep section rather than in terms of being cheap.

Thanks for the comments Johnny. That has really focussed my thoughts. In use the Hyperons and Lightweights don't feel much different in weight, and the Hyperon has less flaws. I already have a couple of sets of Lightweight Standard Gen 3s, so the Hyperons sound like the better option.


Top
   
 Post subject: Re: Ventoux vs Hyperon
PostPosted: Mon Dec 12, 2011 12:37 am 
Offline
Tubbie Guru

Joined: Tue May 03, 2005 2:20 am
Posts: 5835
Location: Belgium
Hi,

IMHO the are the better option by a large margin.
Still, why the shallow wheels?

I must admit, there are times I curse my beloved Boras and wish I'd whipped up the always easy going Neutrons...

So, what's your excuse? :P

Ciao, ;)

_________________
Being a snob is an expensive hobby.


Top
   
 Post subject: Re: Ventoux vs Hyperon
PostPosted: Mon Dec 12, 2011 6:08 pm 
Offline

Joined: Fri Dec 15, 2006 7:45 pm
Posts: 3909
Location: Natovi Landing
Of the two, Hyperons.

I went for 202s as my shallow nice wheelset. They have IMO better hubs than either of your options (by a fair margin on the LWs, and slightly vs. Hyperons), and are far more aerodynamic than either IIRC. They are tough also. Against this, the rear is not as stiff as the Hyperon rear, which is a big plus for that wheelset.

LWs are overpriced to my mind. They are WW but in most other respects they are inferior to 202s and Hyperons.


Top
   
 Post subject: Re: Ventoux vs Hyperon
PostPosted: Mon Dec 12, 2011 7:15 pm 
Offline
User avatar

Joined: Sun Jun 18, 2006 10:29 am
Posts: 5086
Location: Athens, Greece
202 better hubs than Hyperons? Are you sure :?:

_________________
My 6696gr Cipollini Bond
My 8618gr Colnago Master X-light
My 9745gr Pinarello Dyna


Top
   
 Post subject: Re: Ventoux vs Hyperon
PostPosted: Mon Dec 12, 2011 9:16 pm 
Offline

Joined: Fri Dec 15, 2006 7:45 pm
Posts: 3909
Location: Natovi Landing
@kgt ... IMO they edge it on smoothness vs. campag but there is not much at all in it and both are exceptional.


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 31 posts ]  Go to page 1 2 3 Next

All times are UTC+01:00


Who is online

Users browsing this forum: CAFERACER, ewwhite, Exabot [Bot], KCookie, MSNbot Media, Norwegianroadbiker, steff, wetpaint, Yahoo [Bot] and 34 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited