I'm looking to buy a lightweight seatpost clamp to fit on a titanium bike with titanium seatpost. I'd like to have one in a color that matches, like silver aluminium or titanium color.

All the lightest seatpost clamps that I know of (extralite, kcnc, parts of passion, new ultimate) are anodized in most colors except silver. The ones I can find in the color I want are 2-3 times heavier.

Any suggestions?

Thanks!

What size do you need? The carbon-ti is available in silver from r2-bike
http://r2-bike.com/Carbon-Ti-Sattelklemme-X-Clamp3_2

Also MSC
http://r2-bike.com/MSC-Sattelklemme-Ultralight-Titan

_________________
My 7.3kg/6.4 kg 29'er project buildthread!
My Bianchi Oltre XR

I need a 31.8mm.

Thanks for the suggestions, so far the extralite from the same vendor wins, as it is brushed like my frame instead of polished.

Still open to suggestions


Edit: 35 euros shipping to canada Anyone selling extralite in the US? I checked Fairwheel but they don't have silver...

Try one of these:
http://www.ebay.com/itm/J-L-Titanium-Ti ... 1c362d4629
some variants are as light as 8g.....for $15, there isn't much risk

_________________
Used to race....got too wrinkly and old Updated: Racing again! Thought this was unlikely! Eventually, I may even have a decent race!
Edit: HAD a decent race! 16/08/2014

Search http://fairwheelbikes.com/seatpost-coll ... f381f450ab

_________________
-Deacon Doctor Colorado Slim

Thanks, but as I said in my last post Fairwheel doesn't have the ones in silver. I really like the extralite, but even extralite themselves in Italy don't have them in 31.8mm.

The ones on Ebay are not the good color, or take a month to ship.

I just bought an Aerozine (9g) for 26$. Should receive it soon, I'll post here what it looks like. Couldn't find much info on those on the web.

Sand and polish?

_________________
You can't be a real country unless you have a beer and an airline. It helps if you have some kind of a football team, or some nuclear weapons, but at the very least you need a beer.
-- Frank Zappa

I tought about it, but I'm a bit afraid to remove material from such a small (6-8g) part. I think I'll keep an eye in case someone stocks the ultralite in silver. Or I might actually like the aerozine one I bought.

Or just buy the aluminum seat clamp you want, then chemically de-anodize and polish.

_________________
“I always find it amazing that a material can actually sell a product when it’s really the engineering that creates and dictates how well that material will behave or perform.” — Chuck Teixeira

RideWert.com
Wert Cycling on Facebook

Didn't even know that was possible! I'll keep it in mind, thanks!

I was apprehensive about using Zep oven cleaner to take off anodizing, then I used it on an old
hub and boom! -back to natural Aluminum.