Weight Weenies
* FAQ    * Search    * Trending Topics
* Login   * Register
HOME Listings Blog NEW Galleries NEW FAQ Contact About
It is currently Fri Aug 26, 2016 6:16 am
Recently the board software has been updated and there are some known bugs/failures:
- Avatars are currently not being displayed ✔ FIXED
- Tapatalk connection is currently broken ✔ FIXED
- Avatars cannot be uploaded ✔ FIXED

Please note that we will soon do some changes in WW board template design in case to get a fully mobile/desktop responsiveness board!
If you find more errors please post it here: http://weightweenies.starbike.com/forum/viewtopic.php?f=7&t=139062


All times are UTC+01:00





Post new topic  Reply to topic  [ 10 posts ] 
Author Message
PostPosted: Wed Sep 18, 2013 5:13 pm 
Offline

Joined: Mon Apr 08, 2013 1:25 pm
Posts: 27
I want to start of by saying that where we live, there is no shop near that sells the frames that I want.
I am looking into building a (custom) built frame/bike like a Parlee, Alchemy, Crumpton. But it is really hard for me to get to a store or bike builder to get measured for the frame. As I am looking to spend that much money on the bike, I think that part of the process is really important. But I wanted to know if anyone here had any experience ordering a bike that way (online, through an online configurator and having the finished bike sent to you)?

I found shops like wrenchscience and fairwheelbikes that do it that way. Does anyone have any experience with those?

Thanks a lot.


Top
   
PostPosted: Wed Sep 18, 2013 5:51 pm 
Offline
Shop Owner
User avatar

Joined: Tue Mar 10, 2009 5:27 am
Posts: 1244
Location: McCall, ID
I got a frame from Carl Strong of Strong Frames in Bozeman, Mt. We did all measurement via email and the frame sizing came out absolutely perfect. I will never be buying a prebuilt bike ever again. The ride quality is better than anything I've ever ridden, and the fit is absolutely on point.

_________________
http://www.zencyclery.com


Top
   
PostPosted: Wed Sep 18, 2013 6:27 pm 
Offline

Joined: Wed Feb 03, 2010 1:31 am
Posts: 490
Just advice, no experience. Assume you ride a bike now. And have one you think fits very good. Right? Get its dimensions. Every measurement for the bike. Figure out if there is one or two you want different. Figure out how much different. Write all this down. Then talk to the builder and try to come to a conclusion. Compare this conclusion to your written down measurements and see if they are close. They should be close. If not then talk to the builder some more or find a different builder.

I don't need a custom frame. Factory fits me perfectly. I would have no problem having a custom frame built over the internet. I would just give the builder the dimensions of all the frames that fit me perfectly now and tell him to build one identical to this. All my perfectly fitting frames now have about the same dimensions.


Top
   
PostPosted: Thu Sep 19, 2013 1:46 pm 
Offline

Joined: Thu Oct 23, 2003 5:18 pm
Posts: 741
Location: Austin
kojtl1000 wrote:
I want to start of by saying that where we live, there is no shop near that sells the frames that I want.
I am looking into building a (custom) built frame/bike like a Parlee, Alchemy, Crumpton. But it is really hard for me to get to a store or bike builder to get measured for the frame. As I am looking to spend that much money on the bike, I think that part of the process is really important. But I wanted to know if anyone here had any experience ordering a bike that way (online, through an online configurator and having the finished bike sent to you)?

I found shops like wrenchscience and fairwheelbikes that do it that way. Does anyone have any experience with those?

Thanks a lot.


Better than 95% of my clients never step foot in my shop to be measured. I deal mostly remote as you describe. It is not that difficult.

Cheers!

_________________
www.crumptoncycles.com


Top
   
PostPosted: Thu Sep 19, 2013 5:35 pm 
Offline

Joined: Sun Mar 05, 2006 10:11 pm
Posts: 173
Commenting further on RussellS's advice, I would take stock of all the bikes that you have ridden and determine what you like and didn't like about them. It helps to keep track of the frame size of the bikes (if off the shelf) and their geometries (head tube angle, seat angle, etc). Once you have that data you can really go either way - custom or off-the-shelf. My experience is coming from ordering a custom frame, remotely via Crumpton. The main reason I went custom is because I had very specific wants in a bike and felt that going custom was the only way at the time (3 or 4 years ago or so) to get exactly everything what I wanted. The total experience from Nic was outstanding. Multiple emails concerning the fit and finish occurred during the process and resulted in a bike that I am very very happy with. I'm pretty sure I could have gotten an off-the-shelf bike to fit just as well but I would have had to make some tradeoffs that I was not comfortable especially at that price point.

Ian in SD


Top
   
PostPosted: Thu Sep 19, 2013 6:16 pm 
Offline

Joined: Mon Oct 15, 2007 9:28 pm
Posts: 1183
If you know your bike and what you like and dislike about it- take full measurements, communicate all that to the builder- result will be great.
You mentioned Crumpton (and he even responded on the board)- hard to go wrong with that!


Top
   
PostPosted: Thu Sep 19, 2013 7:24 pm 
Offline

Joined: Wed Feb 09, 2005 4:51 am
Posts: 1855
If you're willing to plonk down the amount of money for a high value custom bike, would suggest getting a professional bike fit done by one of the more established fit systems such as Retul or others that may be available to you. It'll probably be about 10-15% of what that custom frame is going to cost and from the values determined, you'll get a frameset that is guaranteed to fit you really well.

I think bike builders like Crumpton, Parlee, Carl Strong etc, etc would be extremely happy if you could supply them such parameters along with your riding preferences too. It would make for a very smooth building process, along with a very well tailored bike as the end product.


Top
   
PostPosted: Thu Sep 19, 2013 9:53 pm 
Offline

Joined: Mon Apr 08, 2013 1:25 pm
Posts: 27
nicrump wrote:
kojtl1000 wrote:
I want to start of by saying that where we live, there is no shop near that sells the frames that I want.
I am looking into building a (custom) built frame/bike like a Parlee, Alchemy, Crumpton. But it is really hard for me to get to a store or bike builder to get measured for the frame. As I am looking to spend that much money on the bike, I think that part of the process is really important. But I wanted to know if anyone here had any experience ordering a bike that way (online, through an online configurator and having the finished bike sent to you)?

I found shops like wrenchscience and fairwheelbikes that do it that way. Does anyone have any experience with those?

Thanks a lot.


Better than 95% of my clients never step foot in my shop to be measured. I deal mostly remote as you describe. It is not that difficult.

Cheers!


thanks Nick. Sent you an email as well last weekend before my question about the other websites ;-). Would love to hear from you on that.


Top
   
PostPosted: Fri Sep 20, 2013 1:43 pm 
Offline

Joined: Thu Oct 23, 2003 5:18 pm
Posts: 741
Location: Austin
Did you not get a response from me? Looking through my inbox, not seeing anything. Wonder if it didn't make it in.

kojtl1000 wrote:
nicrump wrote:
kojtl1000 wrote:
I want to start of by saying that where we live, there is no shop near that sells the frames that I want.
I am looking into building a (custom) built frame/bike like a Parlee, Alchemy, Crumpton. But it is really hard for me to get to a store or bike builder to get measured for the frame. As I am looking to spend that much money on the bike, I think that part of the process is really important. But I wanted to know if anyone here had any experience ordering a bike that way (online, through an online configurator and having the finished bike sent to you)?

I found shops like wrenchscience and fairwheelbikes that do it that way. Does anyone have any experience with those?

Thanks a lot.


Better than 95% of my clients never step foot in my shop to be measured. I deal mostly remote as you describe. It is not that difficult.

Cheers!


thanks Nick. Sent you an email as well last weekend before my question about the other websites ;-). Would love to hear from you on that.

_________________
www.crumptoncycles.com


Top
   
PostPosted: Fri Sep 20, 2013 3:45 pm 
Offline

Joined: Mon Apr 08, 2013 1:25 pm
Posts: 27
You don't need to quote the above


Hey Nick, I just resent the email. I also sent a mail without pictures, maybe that was the problem. Let me know if you got either.


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 10 posts ] 

   Similar Topics   Author   Replies   Views   Last post 
There are no new unread posts for this topic. Buying a repaired carbon frame... bad idea?

[ Go to page: 1 2 ]

in Road

joec

22

2493

Thu Feb 18, 2016 6:19 am

zev View the latest post

There are no new unread posts for this topic. buying an ebay frame from Canada...questions

in Road

chiltonp

2

385

Wed Jun 08, 2016 10:39 pm

BRM View the latest post

There are no new unread posts for this topic. My friend Eds 58cm custom 700 grm frame

[ Go to page: 1 2 3 4 5 6 ]

in Road

xena

75

3416

Wed Mar 09, 2016 9:32 pm

kgt View the latest post

There are no new unread posts for this topic. Suggestion for Carbon Frame Worthy of Custom Paint Job

[ Go to page: 1 2 ]

in Road

RyanH

23

1447

Thu Sep 17, 2015 11:52 am

Stolichnaya View the latest post

There are no new unread posts for this topic. Attachment(s) Help buying a used Colnago C40 or C50 frameset

[ Go to page: 1 2 ]

in Road

thepainandsuffering

26

1245

Mon May 02, 2016 8:19 am

Bondurant View the latest post


All times are UTC+01:00


Who is online

Users browsing this forum: 8bitmarlon, AJS914, Bing [Bot], Google [Bot] and 38 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited