Weight Weenies
* FAQ    * Search    * Trending Topics
* Login   * Register
HOME Listings Blog NEW Galleries NEW FAQ Contact About
It is currently Sun May 01, 2016 2:00 am
Recently the board software has been updated and there are some known bugs/failures:
- Avatars are currently not being displayed
- Tapatalk connection is currently broken

Those bugs will be fixed ASAP (next few days) as they are unfortunately more serious than expected.

If you find more errors please post it here: http://weightweenies.starbike.com/forum/viewtopic.php?f=7&t=139062

All times are UTC+01:00

Post new topic  Reply to topic  [ 2 posts ] 
Author Message
PostPosted: Thu Sep 12, 2013 10:30 am 

Joined: Thu Aug 29, 2013 5:40 pm
Posts: 9
I have stripped back my scott cr1 saunier duval to raw carbon ( using the craft knife method), and plan to leave it that way. Around the joins ( headtube, BB and around the seatpost there are some thin strips of red in the areas where the tubes are bonded. My quesion is, can I scrape that away also or would that compromise the strength of the frame ?

I'm happy to leave them there, as it adds to the raw look, but if you can scrape it off, then I would probably do so.

Thanks !

...i scraped out the filler they use to smoothen out the joins, but the red stuff looks a bit more serious and is a lot harder.

PostPosted: Thu Sep 12, 2013 10:35 am 

Joined: Mon Aug 15, 2011 4:48 am
Posts: 419
My addict was the same. The red is the residual glue. It's not structural if its sitting on the outside of the carbon. Scrape her off.


Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 2 posts ] 

All times are UTC+01:00

Who is online

Users browsing this forum: fezi, Yahoo [Bot] and 16 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited