Ambrosio Nemesis stock?
Moderator: robbosmans
Does anyone know of a shop (EU based) that currently (and actually) has nemesis rims in stock?
Lots of places are listing them, but either don't have stock, or only have 36H!
Looking for a 28 and a 32 to match up to some D-A 9000 hubs for a new build.
(Would prefer to be able to get both rims from the same place to save on a bit of postage!)
Lots of places are listing them, but either don't have stock, or only have 36H!
Looking for a 28 and a 32 to match up to some D-A 9000 hubs for a new build.
(Would prefer to be able to get both rims from the same place to save on a bit of postage!)
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
- StradaJon
- in the industry
- Posts: 133
- Joined: Fri Sep 09, 2011 2:38 pm
- Location: Brighton, UK
- Contact:
The 28 hole Ambrosio Crono / F20 has an 80kg weight limit so it depends on your weight.
Strada Hand Built Wheels
http://www.stradawheels.co.uk
http://www.stradawheels.co.uk
Bit the bullet and just got a couple of 32s. (Combination of 9000 hubs, supercomp and revs.)
Weight of 4 spokes is really neither here nor there and not worth the effort of sorting out as it'll be going on a steel custom build anyway!
More interested in comfort with a vague interest in not weighing too much.
Weight of 4 spokes is really neither here nor there and not worth the effort of sorting out as it'll be going on a steel custom build anyway!
More interested in comfort with a vague interest in not weighing too much.
Bugger.
Ordered black spokes rear and silver spokes front. More hassle than it's worth (or the spokes are worth!) to send em back. Got some silvers on the way to complete the nemesis/dura-ace pair.
BUT
I was planning a second set of clincher wheels as well (on ultegra 11s hubs), so may as well use the spare spokes. Any other rims with a 610mm diameter, only ones i've found so far are H+Son TB14. (Which luckily enough was one i was considering anyway)
Any other suggestions?
Ordered black spokes rear and silver spokes front. More hassle than it's worth (or the spokes are worth!) to send em back. Got some silvers on the way to complete the nemesis/dura-ace pair.
BUT
I was planning a second set of clincher wheels as well (on ultegra 11s hubs), so may as well use the spare spokes. Any other rims with a 610mm diameter, only ones i've found so far are H+Son TB14. (Which luckily enough was one i was considering anyway)
Any other suggestions?
-
- in the industry
- Posts: 5777
- Joined: Sat May 12, 2012 7:25 pm
- Location: Glermsford, Suffolk U.K
- Contact:
A 32 spoke wheel with a shallow rim is not aero to begin with so why waste your money on CX-rays. Also if CX-ray's are priced at three times the price or rev's then some one is charging to much for CX-rays. Also Laser spokes are cheaper than revolution spokes and ust as good.
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com