Hi there i am a bit confused, i have a bmc slr01 2011 frame, there is bb30 but mine seems like standard cups
then i see this link with the 2011 bike and a photo tha clear we see bsa bottom bracket, what cups i need ???
http://road.cc/content/review/47665-bmc ... hine-slr01" onclick="window.open(this.href);return false;" onclick="window.open(this.href);return false;
''Due to some longevity issue negative feedback BB30 is being dropped on the 2012 models to be replaced with BB86. Mind you, as BMC are moving towards Shimano for 2012 the BB30 would have had to go anyway. Our frame is fitted with adaptors to allow standard Shimano outboard bearing cups to be fitted to the BB30 'hole'. This means a slightly larger Q factor compared to the press fit BB30 & 86 versions though''
and thats mine
Bmc slr01 cups (2011)
Moderator: robbosmans
https://www.instagram.com/banik_kapa/?hl=el
2010 Giant Tcr Advanced
2012 Bmc Slr 01
2016 Scott Foil
2018 Trek Emonda Slr Team Issue
2010 Giant Tcr Advanced
2012 Bmc Slr 01
2016 Scott Foil
2018 Trek Emonda Slr Team Issue
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
GT56 wrote:the picture is not all that clear, but looks like bb30 to bsa adapter
is there threads in there ?
Yes it is threads in there, this bsa adapter is permanent ???
So i need bottom with threads, correct ?
https://www.instagram.com/banik_kapa/?hl=el
2010 Giant Tcr Advanced
2012 Bmc Slr 01
2016 Scott Foil
2018 Trek Emonda Slr Team Issue
2010 Giant Tcr Advanced
2012 Bmc Slr 01
2016 Scott Foil
2018 Trek Emonda Slr Team Issue
banik wrote:GT56 wrote:the picture is not all that clear, but looks like bb30 to bsa adapter
is there threads in there ?
Yes it is threads in there, this bsa adapter is permanent ???
So i need bottom with threads, correct ?
yeah bsa most likely
can you measure outside to outside with a slide measure, it seems to me these adapter have added quite a bit of width to the bottom bracket shell
the value we are looking for should be close to 68 mm
GT56 wrote:yeah bsa most likely
can you measure outside to outside with a slide measure, it seems to me these adapter have added quite a bit of width to the bottom bracket shell
the value we are looking for should be close to 68 mm
Μmmm thanks, i dont have problem if is bsa....i just spoke with a friend and told me that is bb30 with bsa adapter, i dont know why but is ok. Also told me that i want now is rotor bb1 bottom bracket to match with rotor 3d crank...
https://www.instagram.com/banik_kapa/?hl=el
2010 Giant Tcr Advanced
2012 Bmc Slr 01
2016 Scott Foil
2018 Trek Emonda Slr Team Issue
2010 Giant Tcr Advanced
2012 Bmc Slr 01
2016 Scott Foil
2018 Trek Emonda Slr Team Issue