Running new cables on SuperSix Evo - Internal?

Back by popular demand, the general all-things Road forum!

Moderator: robbosmans

Post Reply
User avatar
G6612
Posts: 279
Joined: Tue Aug 17, 2010 4:20 pm
Location: Pittsburgh, PA

by G6612

I have a 2013 SuperSix Evo which has the internal routed cable, I am going to be running new cables only not replacing the housing still in good shape. My question is for anyone with an Evo is how to you run the new cable thru the frame? Does the housing run all the way thru the frame or is their stops at the entry and exit of the frame. Looking for the easiest way to do it.

Thanks in advance!

by Weenie


Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓    Broad Selection ✓    Worldwide Delivery ✓

www.starbike.com



timzcat
Posts: 315
Joined: Thu Sep 30, 2010 5:50 am

by timzcat

There is a stop at the front and rear. It's not difficult just use a strong magnet and you can guide the cable right along the left size to the rear hole. The stops come right out making the working hole much bigger.

User avatar
G6612
Posts: 279
Joined: Tue Aug 17, 2010 4:20 pm
Location: Pittsburgh, PA

by G6612

Thank you anyone have any opinions on Teflon coated cables? KCNC has some green cables that I think might look awesome on the bike.

Post Reply