Weight Weenies
* FAQ    * Search    * Trending Topics
* Login   * Register
HOME Listings Blog NEW Galleries NEW FAQ Contact About Impressum
It is currently Tue Dec 06, 2016 1:23 pm
Recently the board software has been updated and there are some known bugs/failures:
- Avatars are currently not being displayed ✔ FIXED
- Tapatalk connection is currently broken ✔ FIXED
- Avatars cannot be uploaded ✔ FIXED

Please note that we will soon do some changes in WW board template design in case to get a fully mobile/desktop responsiveness board!
If you find more errors please post it here: http://weightweenies.starbike.com/forum/viewtopic.php?f=7&t=139062


All times are UTC+01:00





Post new topic  Reply to topic  [ 4 posts ] 
Author Message
PostPosted: Thu Aug 15, 2013 3:18 pm 
Offline
Shop Owner

Joined: Sat Feb 13, 2010 7:41 pm
Posts: 92
Location: UK
Hi all,

Wondered if anyone else had come across this. With some of the cheaper Shimano wheels on the market coming with a fully threaded axle, namely the area that sits on the carbon drop out of the frame, has anyone experienced this digging into the actual inside area of the drop out?

I get the serrated teeth area on the skewer and axle nut digging into the flat clamp sections on the dropouts, this is a common problem, but I mean the inside of the dropout where the threaded axle section rests on.

It has worn the dropout on the drive side to the point where the wheel now can move slightly forward on the drive side, leaving it non centre in frame.

Any ideas or suggested fixes, as this kind of wheel will always dig into the frame?


Top
   
PostPosted: Thu Aug 15, 2013 3:33 pm 
Offline
User avatar

Joined: Fri Jul 23, 2004 8:24 pm
Posts: 1922
Location: Houston, Texas
hanzypanzy wrote:
but I mean the inside of the dropout where the threaded axle section rests on.
That really sounds like the axle is are missing or has an incorrect end cap if the axle has exposed threads and would ask to which specific model of Shimano wheelset are you referring?

_________________
Michael - The Anaerobic Threshold is neither...


Top
   
Posted: Thu Aug 15, 2013 3:33 pm 


Top
   
 
PostPosted: Thu Aug 15, 2013 4:25 pm 
Offline
Shop Owner

Joined: Sat Feb 13, 2010 7:41 pm
Posts: 92
Location: UK
ms6073 wrote:
hanzypanzy wrote:
but I mean the inside of the dropout where the threaded axle section rests on.
That really sounds like the axle is are missing or has an incorrect end cap if the axle has exposed threads and would ask to which specific model of Shimano wheelset are you referring?

I am talking about the RS80 rear wheel. I'm pretty sure that's the way they come standard. Threaded axle so the nuts can be used to set bearing preload, then the same axle area that the nut screws over, doubles up as the end cap section that sits in the dropout.


Top
   
PostPosted: Thu Aug 15, 2013 4:49 pm 
Offline
User avatar

Joined: Fri Feb 11, 2011 3:04 am
Posts: 2693
Location: Mississippi
Yeah, this is how they come standard......I have never had an issue with this sine I used the Shimano skewers that held very tight and prevented movement in the dropout. If you use less robust skewers, I can see where some movement could occur that could damage the dropout.

_________________
Mosaic RS-1
http://weightweenies.starbike.com/forum/viewtopic.php?f=10&t=138478

Cielo by Chris King Cross Racer
http://weightweenies.starbike.com/forum/viewtopic.php?f=10&t=134376


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 4 posts ] 

   Similar Topics   Author   Replies   Views   Last post 
There are no new unread posts for this topic. Shimano rear derailleur cages?!

in Road

Jcgill

5

742

Mon Apr 25, 2016 6:31 pm

eric View the latest post

There are no new unread posts for this topic. Colnago C60 rear brake rub. Stiffer wheels?

in Road

RedRacer

10

1017

Sun Jun 12, 2016 3:58 pm

jimborello View the latest post

There are no new unread posts for this topic. 11 speed Shimano jockey wheels

in Road

GT8

8

980

Thu Dec 24, 2015 8:51 pm

Zigmeister View the latest post

There are no new unread posts for this topic. Colnago C60 rear triangle

in Road

markyboy

8

588

Tue Feb 23, 2016 6:08 pm

Calnago View the latest post

There are no new unread posts for this topic. 3D printing rear derailleur hanger

in Road

ChristianB

5

516

Wed Jul 20, 2016 7:14 pm

Camilo View the latest post


All times are UTC+01:00


Who is online

Users browsing this forum: Google [Bot], MrMojo, MSNbot Media, tomvin90 and 37 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited