Weight Weenies
http://weightweenies.starbike.com/forum/

7x9mm carbon rail saddle & Ritchey Superlogic 1-bolt adaptor
http://weightweenies.starbike.com/forum/viewtopic.php?f=3&t=117983
Page 1 of 1

Author:  flips [ Fri Aug 09, 2013 10:29 pm ]
Post subject:  7x9mm carbon rail saddle & Ritchey Superlogic 1-bolt adaptor

I have a Ritchey Superlogic Carbon 1-bolt Seatpost. I'm considering purchasing a MCFK Carbon Saddle. The MCFK's rails are 7x9mm, ovalized. However, on Ritchey's site they list two adaptor sizes, 8x8.5 and 7x9.6. Does anyone know whether I could shim the rails somehow and use the 7x9.6, or any viable solution?

Best.

Author:  Weenie [ Fri Aug 09, 2013 10:29 pm ]
Post subject:  7x9mm carbon rail saddle & Ritchey Superlogic 1-bolt adaptor


Author:  5 8 5 [ Fri Aug 09, 2013 10:58 pm ]
Post subject:  Re: 7x9mm carbon rail saddle & Ritchey Superlogic 1-bolt ada

The way the clamp works, I would expect the 7x9.6 to work fine.

Author:  Biff [ Fri Aug 09, 2013 11:19 pm ]
Post subject:  Re: 7x9mm carbon rail saddle & Ritchey Superlogic 1-bolt ada

+1

...If not some braided tape can add a little to the diameter

Author:  em3 [ Fri Aug 09, 2013 11:38 pm ]
Post subject:  Re: 7x9mm carbon rail saddle & Ritchey Superlogic 1-bolt ada

...7 mm is the width and 9.6 is the height...the width is the most important factor to be concerned about. You will be fine with a 7x9mm saddle rail.
EM3

Author:  flips [ Sat Aug 10, 2013 1:17 am ]
Post subject:  Re: 7x9mm carbon rail saddle & Ritchey Superlogic 1-bolt ada

thank you all for the help!!

best.

Author:  fitty4 [ Sat Aug 10, 2013 10:06 pm ]
Post subject:  Re: 7x9mm carbon rail saddle & Ritchey Superlogic 1-bolt ada

I have used the superlogic seatpost with romin pro saddle (also 7x9 carbon rails) with zero problems, of course with the adapter. I wrote: "used" because I need a zero setback post which I now use

Author:  Weenie [ Sat Aug 10, 2013 10:06 pm ]
Post subject:  Re: 7x9mm carbon rail saddle & Ritchey Superlogic 1-bolt ada


Author:  wing01 [ Mon Aug 12, 2013 10:22 am ]
Post subject:  Re: 7x9mm carbon rail saddle & Ritchey Superlogic 1-bolt ada

hmm,I have the same question which you have ,and my setpost and the adaptor which i got from wiggle is on my way,and I hope the adaptor will work!

Page 1 of 1 All times are UTC+01:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/