Weight Weenies
http://weightweenies.starbike.com/forum/

Falco Bikes
http://weightweenies.starbike.com/forum/viewtopic.php?f=3&t=117828
Page 1 of 1

Author:  teufelhunden222 [ Sun Aug 04, 2013 7:54 am ]
Post subject:  Falco Bikes

Does anyone have one of these in carbon in the San Diego area? Also how is the power transfer?

Author:  Weenie [ Sun Aug 04, 2013 7:54 am ]
Post subject:  Falco Bikes


Author:  fitty4 [ Sun Aug 04, 2013 9:23 am ]
Post subject:  Re: Falco Bikes

The image do not work! I'm sure this guy can help you with where it's available: memberlist.php?mode=viewprofile&u=2599 you can also search the forum for falco together with his username

Author:  istigatrice [ Sun Aug 04, 2013 9:57 am ]
Post subject:  Re: Falco Bikes

hmm, they look like very interesting bikes... does anyone on the board have one to report on?

Author:  maggierose [ Sun Aug 04, 2013 6:40 pm ]
Post subject:  Re: Falco Bikes

I have one but I am also selling them:

Image

Peregrine's have been ISP models but are transitioning to a traditional albeit proprietary seat-post model. I raced mine in the Georgia Grand Prix omnium and some local training races.

Image

If you want to know more give me a buzz: Chris at Maggie Rose's Bicycle Shop 904-636-0544.

The bike is very good!

Author:  Yashnoon [ Wed Aug 07, 2013 4:12 am ]
Post subject:  Re: Falco Bikes

Hey, everyone, I have a Falco Peregrine HM version, I got in Oct. last year. I really love it. It's actually quite comfortable but also stiff enough for me. The frame has many clever design details that you can see only when you are close to the bike. Frame weigh 923 grams, which is not as light as Evo or R5CA, but I don't live in the mountain so it is fine. Built with some homemade G3 wheels, it was 6.7kg with pedals and Garmin 800 computer, and with Madfiber clinchers it's 6.5kg. Funny how the MF decals look purple in the sunlight.

When I built the bike, I tried a mix of Sram and Fulcrum/Campy group, with a Giant stem, which is really strong.

The short coming of the bike is the seatpost is quite difficult to set up. Also ISP is difficult to travel with. Another thing to be careful with is if you turn the fork too much, it will knock into the down tube and get a scratch.

My last bike was a Trek and a NEO. I like it much more than the NEO.

Here is a discussion I started in a Chinese bike discussion board.
http://www.chinabike.net/newbbs/dispbbs ... &id=368587" onclick="window.open(this.href);return false;
Image

When built with Madfibers, both frame and wheels have large checked pattern. I know many people dont' like this pattern but I do.

Image

Author:  istigatrice [ Wed Aug 07, 2013 9:40 am ]
Post subject:  Re: Falco Bikes

923g for an ISP frame... that isn't that bad is it? That would that standardize to around ~750g for the frame?

Also, couldn't help but to notice, that's a weird way to route a rd cable, is it supposed to be done like that?

Author:  elviento [ Wed Aug 07, 2013 10:35 am ]
Post subject:  Re: Falco Bikes

Let me address that question -- we make these so we may be biased.

The ISP adds around 40 grams so without ISP it's more or less 880-ish.

The rear cable routing is intended that way and it saves roughly 100-120mm of cable and also results in less bend in the cable. The turn at the seat cluster is a less abrupt angle than under the BB for traditional routing, and the turn at the rear dropout is also less than traditional routing as it starts from 1 o'clock instead of 4 o'clock, turning counterclockwise. Works great. We have a couple hundred satisfied customers but I'd like to see more on ww, so pls excuse me for blowing our own horn a bit.

The following are some of our users' rides, in addition to Chris/Yashnoon's. But there are a lot more at http://www.falcobike.com/index.php/falc ... =gallery_c

Image
Image
Image
Image
Image
Image
Image

Author:  micky [ Fri Aug 09, 2013 8:58 pm ]
Post subject:  Re: Falco Bikes

@elviento, do you have yourself, or any costumer, assembled a frame with Di2 yet?
Any photo?

Author:  fletch62 [ Fri Sep 20, 2013 11:31 am ]
Post subject:  Re: Falco Bikes

Is this one of your bikes or another brand with the same name?
http://www.tririg.com/galleries.php?id=2013_09_Falco_V_Bike_First_Look

Author:  kavitator [ Fri Sep 20, 2013 12:08 pm ]
Post subject:  Re: Falco Bikes

This is from FALCO

Author:  digiadaamore [ Sat Sep 21, 2013 3:47 pm ]
Post subject:  Re: Falco Bikes

Hi guys, very interested in your saker frameset! just wondering what made you go with a bsc bottom bracket on this frame? i have hollowgrams on my cannondale and that is a big consideration when purchasing a new frame, i think many of your customers would be coming from bb30 frames.

Author:  Phill P [ Sun Sep 22, 2013 1:10 am ]
Post subject:  Re: Falco Bikes

Love the V frame - hope it sell well to pay back the investment!!

Author:  Weenie [ Sun Sep 22, 2013 1:10 am ]
Post subject:  Re: Falco Bikes


Page 1 of 1 All times are UTC+01:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/