HOT: Active* forum members generally gain 5% discount at starbike.com store!
Weight Weenies
* FAQ    * Search    * Trending Topics
* Login   * Register
HOME Listings Blog NEW Articles FAQ Contact About




Post new topic Reply to topic  [ 44 posts ] 
Go to page Previous  1, 2, 3
Author Message
PostPosted: Mon Jul 29, 2013 6:39 pm 
Offline

Joined: Tue Nov 11, 2003 9:47 pm
Posts: 1813
Location: Santa Cruz, California, USA
If the crank actually fits BBright it'll put the pedals in the right place. The NDS is no wider than external bearing cups on a BSA BB or BB92/86.
Many cranks have spindles long enough for BBright. It's just the short spindle BB30 ones that don't fit.


Top
 Profile  
 
Posted: Mon Jul 29, 2013 6:39 pm 


Top
  
 
PostPosted: Mon Jul 29, 2013 7:08 pm 
Offline

Joined: Tue Sep 14, 2010 3:28 pm
Posts: 1405
With all the lightweight cranks available at present I just don't get the continued fascination with mating a Hollowgram to a BSA BB :noidea:


Top
 Profile  
 
PostPosted: Mon Jul 29, 2013 7:51 pm 
Offline

Joined: Wed Jun 12, 2013 8:12 pm
Posts: 7
just pulled the trigger on a cervelo edition 3d+ crankset incl. q-rings. better looking than regular graphics IMO.

will pair them w rotors ceramic BSA bearings.

Not what I was gunning for but its getting me exited all the same - i love new gear! cant wait.


Top
 Profile  
 
PostPosted: Mon Jul 29, 2013 11:03 pm 
Offline
User avatar

Joined: Fri Jul 23, 2004 8:24 pm
Posts: 1563
Location: Houston, Texas
bricky21 wrote:
I just don't get the continued fascination with mating a Hollowgram to a BSA BB :noidea:
Yeah, that it a valid point but that argument is not quite as valid when you are talking about mating a 'hollowgram SRM' on a time trial bike with a BSA 24 bottom bracket shell and have even considered having the alloy insert in the carbon bottom bracket shell machined to accept PF30 bottom bracket. :lol:

_________________
Michael - The Anaerobic Threshold is neither...


Top
 Profile  
 
PostPosted: Tue Jul 30, 2013 4:37 am 
Offline

Joined: Tue Sep 14, 2010 3:28 pm
Posts: 1405
Clavicula M3 SRM is cheaper and would be really close in weight possibly even lighter after modifications to the Hollowgram. It fits on everything too. Has anyone actually machined out a BSA frame to take a PF30? That would be an interesting read. I suppose I get it if you already own the crank.


Top
 Profile  
 
 Post subject:
PostPosted: Tue Jul 30, 2013 8:00 am 
Offline
Shop Owner

Joined: Sat Jun 13, 2009 4:02 am
Posts: 1976
Location: NoVA/DC
To answer the SiSL2/bbright question: according to my measurements, using the 109mm spindle but accepting the too-narrow chainline that the 104mm spindle gave, you are still about 2mm short. The left arm will contact the lip of the pf30 cup. I wanted to try it on an r5ca (which is bbright but with direct bearings, so no extra lip), but my friend that owns one wouldn't let me mess with it...

Sent from my EVO using Tapatalk 4 Beta


Top
 Profile  
 
 Post subject: Re:
PostPosted: Tue Jul 30, 2013 1:28 pm 
Offline
User avatar

Joined: Fri Jul 23, 2004 8:24 pm
Posts: 1563
Location: Houston, Texas
thisisatest wrote:
using the 109mm spindle... you are still about 2mm short. The left arm will contact the lip of the pf30 cup.
Again, all cojecture but sounds like a Cannondale Hollowgram 122mm Mountain Spindle with the ridge machined off would solve that problem.

_________________
Michael - The Anaerobic Threshold is neither...


Top
 Profile  
 
PostPosted: Tue Jul 30, 2013 6:59 pm 
Offline

Joined: Tue Nov 11, 2003 9:47 pm
Posts: 1813
Location: Santa Cruz, California, USA
Would the Q be the same on both sides? And what would the total Q be?


Top
 Profile  
 
PostPosted: Wed Aug 28, 2013 8:24 am 
Offline

Joined: Fri Aug 02, 2013 11:41 pm
Posts: 24
All I know is member "Rogntudju" did just that cannondale sisl2 on a Open O 1.0 bbright frame. See pictures here.viewtopic.php?f=10&t=103751

_________________
2004 trek carbon 9.8
2013 giant talon 29er
2001 mongoose XR-500


Top
 Profile  
 
PostPosted: Wed Aug 28, 2013 12:47 pm 
Offline
Shop Owner

Joined: Sat Jun 13, 2009 4:02 am
Posts: 1976
Location: NoVA/DC
Jrock,
mountain bikes are a completely different story. the SiSl2 mountain crank uses a 132mm spindle, there is plenty of axle to fit it to whatever you want, once the lip is machined off...


Top
 Profile  
 
PostPosted: Wed Aug 28, 2013 5:00 pm 
Offline

Joined: Mon Apr 03, 2006 8:53 am
Posts: 345
From the other thread

He used a 122 spindle 104/109 + 11 = 121

The real issue is that the spindle has raised bearing races that are not in line with the PF bearings.

He had to have the old raised bearing races machined down and new ones built up

C


Top
 Profile  
 
PostPosted: Sun Apr 27, 2014 8:36 pm 
Offline

Joined: Mon Apr 03, 2006 8:53 am
Posts: 345
So I can't let this drop... and I need some help/reassurance

The math on BBright and hollowgram was that the 104 spindle was 11mm short on the non drive side...

So the new spindle is 109 and the bearing races on the spindle are bigger and at the ends of the spindle

So now we are 6mm short and it can come from either side....

Dropping the shields gets you 4mm so we are looking for 2mm more

You have to leave the 2.5mm SL2 to keep the chainline perfect, however wave washer and "up to" 1.5mm of spacers on the non drive side implies that that there might be 2mm of "wiggle" room/tolerances.

What if you don't install the bearing shields and and the BB30A spacer? anybody know how wide the BB30A spacer is? Is my math right? Are the tolerances really this tight?

http://media.cannondale.com/media/uploa ... r_1012.pdf

Thanks
C


Top
 Profile  
 
PostPosted: Sat Nov 01, 2014 1:29 am 
Offline
User avatar

Joined: Mon Sep 21, 2009 11:12 pm
Posts: 41
has somebody achieved it?

_________________
[url]http://www.weightweenies.com.br[/url]


Top
 Profile  
 
PostPosted: Sat Nov 01, 2014 1:34 pm 
Offline
User avatar

Joined: Fri Dec 11, 2009 10:38 pm
Posts: 1128
Location: Toronto
Quote:
Q. What is the difference between BBright™ and BB30™?
A. For the crank, BBright™ uses the same diameter axle as BB30™, with the addition of 11mm length on the left side of the spindle, and the left crank is straighter, (similar to existing arms for external bearing cranks).


Just putting a BB30 crank on a longer spindle will put the NDS pedal 11mm to the left, and increase the Q factor as well as making it asymmetric.

It requires a different, actually more conventional, shaped NDS crank.

http://bbright.net/faq.aspx

_________________
There's sometimes a buggy.
How many drivers does a buggy have?

One.

So let's just say I'm drivin' this buggy...
and if you fix your attitude you can ride along with me.

http://www.youtube.com/watch?v=GekiIMh4ZkM


Top
 Profile  
 
Posted: Sat Nov 01, 2014 1:34 pm 


Top
  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 44 posts ] 
Go to page Previous  1, 2, 3


Who is online

Users browsing this forum: Bing [Bot], Google [Bot], steff, Yahoo [Bot] and 47 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  

   Similar Topics   Author   Replies   Views   Last post 
There are no new unread posts for this topic. Hollowgram SiSl with SRAM 22?

in Road

TerribleCadence

2

663

Wed Jan 15, 2014 7:49 am

TerribleCadence View the latest post

There are no new unread posts for this topic. Hollowgram SiSL bond weakening?

in Road

hmai18

5

713

Sun May 04, 2014 2:44 am

hmai18 View the latest post

There are no new unread posts for this topic. Cannondale SI / Hollowgram compat

in Road

HillRPete

6

858

Mon Aug 04, 2014 2:21 pm

topflightpro View the latest post

There are no new unread posts for this topic. Hollowgram on non cannondale bike - is it just wrong??

[ Go to page: 1, 2 ]

in Road

roadhog44

17

1175

Sat Aug 02, 2014 7:45 pm

shoemakerpom2010 View the latest post

There are no new unread posts for this topic. Cannondale hollowgram SiSL2 - removing FSA rings/spider

in Road

Brianblunt

3

474

Wed Aug 06, 2014 2:52 am

Brianblunt View the latest post


It is currently Fri Dec 26, 2014 4:17 pm

All times are UTC + 1 hour




Advertising   –  FAQ   –  Contact   –  Convert   –  About

© Weight Weenies 2000-2013
hosted by starbike.com


How to get rid of these ads? Just register!


Powered by phpBB