Internal cable routing Look 695

Discuss light weight issues concerning road bikes & parts.
Posts: 220
Joined: Thu Apr 12, 2012 4:33 am

by Wcl4

I have a 695. You need should get the Look bolts. They are slightly longer. Careful though as the slightest amount of over torque will break them.

by Weenie

Posts: 30
Joined: Thu Apr 19, 2012 1:06 pm

by schroeds

Hey 695 owners, I have a problem/question.

I was lucky enough to buy a used bare frame in great condition which I'm building up.

My problem is the fd cable routing up through the frame from underneath.... cant get the fd cable straw/outer/guide/whatever you call it through behind the BB.

There's a hole under the BB just past the nylon guide, and a hole on the flat area between the rear stays, but there seems to be no tunnel between the two! I've tried pushing a skewer in at each end and seem to hit something solid at a shallow level (which ging in from underneath) and deeper going in from on top.

Does anybody know what's going on here?


Post Reply
  • Similar Topics
    Last post