Weight Weenies
* FAQ    * Search    * Trending Topics
* Login   * Register
HOME Listings Blog NEW Galleries NEW FAQ Contact About Impressum
It is currently Sun Oct 22, 2017 8:01 am

All times are UTC+01:00





Post new topic  This topic is locked, you cannot edit posts or make further replies.  [ 6 posts ] 
Author Message
 Post subject: Sanding carbon?
PostPosted: Thu Jul 18, 2013 9:58 pm 
Offline

Joined: Sat Jun 15, 2013 9:50 am
Posts: 35
I want to remove the red bmc design from my easton forks. Can you guys recommend a step by step guide?

As a noob, can I please recommend you use Search or look in the Road Index (located at the top of the Road page)

viewtopic.php?f=3&t=83500&hilit=sharp+blade


Top
   
 
 Post subject: Sanding carbon?
Posted: Thu Jul 18, 2013 9:58 pm 


Top
   
 
 Post subject: Re: Sanding carbon?
PostPosted: Thu Jul 18, 2013 10:02 pm 
Offline
User avatar

Joined: Sat May 28, 2005 9:21 pm
Posts: 754
Location: Norway, Oslo
Start with a lower grit wet-sanding paper. I started with 400grit. Then work your way up towards around 1200grit for polish. When you see the dust is grey instead of clear you've hit carbon, so stop sanding at that point


Top
   
 
 Post subject:
PostPosted: Fri Jul 19, 2013 6:30 pm 
Offline

Joined: Sat Jun 15, 2013 9:50 am
Posts: 35
Thanks for the tips. I may give it a shot next week if the weather turns pants


Top
   
 
 Post subject: Re: Sanding carbon?
PostPosted: Fri Jul 19, 2013 7:36 pm 
Offline

Joined: Mon Jan 24, 2011 8:09 pm
Posts: 921
As above pretty much. I sanded graphics off on a set of wheels under clear coat. I started with a heavier grit, emory cloth. Then once I got down to the stickers and area, went with finer grit.

If you start to get grey/dark powder, you are getting into the carbon fiber/resin...try to avoid that, and don't breath it.

Otherwise, just sand the clear coat off and hope that the decals aren't into the carbon/resin layer at all.

There was no choice on my wheels to hit some carbon dust since the decals had melted somewhat into the carbon/resin layer. I was real careful and didn't go deep, just enough to get the decals off.

Then, use regular spray clear coat (yes, like from the big box home store), satin/flat/gloss, whatever you want for the finish, and clear coat the carbon once finished to protect it. Once dry, go over it again with a fine grit wet sand. The finish will be silky smooth.

I've had no problems with 2000 miles on my wheels since doing it.


Top
   
 
 Post subject: Re: Sanding carbon?
PostPosted: Fri Jul 19, 2013 9:55 pm 
Offline

Joined: Fri Mar 23, 2012 11:36 am
Posts: 22
Just a warning.
Not all carbon is made with UV stable resins.
Not all clearcoats block UV.
So if you by chance have carbon with no UV inhibitors and it's in the clearcoat.....
You have to ask the manufacturer of your parts about UV stability.

I would hope any name brand stuff is UV stable, but cheap Chinese stuff make me worry.

This an old but good test on carbon, I didn't bother reading it all but start at page 9 and you see the dangers involved.
http://stuff.mit.edu/afs/athena.mit.edu ... 6p2713.pdf" onclick="window.open(this.href);return false;


Top
   
 
 Post subject: Re: Sanding carbon?
Posted: Fri Jul 19, 2013 9:55 pm 


Top
   
 
 Post subject: Re: Sanding carbon?
PostPosted: Fri Jul 19, 2013 11:31 pm 
Offline

Joined: Fri Jan 07, 2011 6:58 am
Posts: 1361
Location: 604
There is a substantial thread on this if you search for it.


Top
   
 
Display posts from previous:  Sort by  
Post new topic  This topic is locked, you cannot edit posts or make further replies.  [ 6 posts ] 

   Similar Topics   Author   Replies   Views   Last post 
There are no new unread posts for this topic. Leather top vs. Carbon Fiber saddles (SMP Forma vs. Carbon Lite)

in Road

dgeesaman

4

550

Thu Aug 31, 2017 11:52 am

kgt View the latest post

There are no new unread posts for this topic. Attachment(s) New Saddle: Selle Italia Carbonio Flow vs San Marco Aspide Carbon vs San Marco Mantra Carbon

[ Go to page: 1 2 3 ]

in Road

3Pio

33

2051

Wed Sep 13, 2017 6:08 am

3Pio View the latest post

There are no new unread posts for this topic. Is carbon lugged dead? Have modern monocoque frames usurped carbon lugged frames outside of just weight?

[ Go to page: 1 2 ]

in Road

tranzformer

17

2232

Sat Jul 22, 2017 4:14 pm

spartacus View the latest post

There are no new unread posts for this topic. Help me please-Carbon fiber

in Road

Bianchi10

10

1366

Tue Jun 27, 2017 10:46 pm

thumper88 View the latest post

There are no new unread posts for this topic. Mag 150 with Carbon Axle?

in Road

whydobearsxplod

5

372

Fri Sep 29, 2017 11:30 am

ms6073 View the latest post


All times are UTC+01:00


Who is online

Users browsing this forum: Attermann, Google [Bot], unlucky and 28 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited