Weight Weenies
* FAQ    * Search    * Trending Topics
* Login   * Register
HOME Listings Blog NEW Galleries NEW FAQ Contact About
It is currently Sat Jul 23, 2016 6:30 pm
Recently the board software has been updated and there are some known bugs/failures:
- Avatars are currently not being displayed ✔ FIXED
- Tapatalk connection is currently broken ✔ FIXED
- Avatars cannot be uploaded ✔ FIXED

Please note that we will soon do some changes in WW board template design in case to get a fully mobile/desktop responsiveness board!
If you find more errors please post it here: http://weightweenies.starbike.com/forum/viewtopic.php?f=7&t=139062


All times are UTC+01:00





Post new topic  Reply to topic  [ 3 posts ] 
Author Message
PostPosted: Tue Jul 16, 2013 2:43 pm 
Offline

Joined: Tue May 23, 2006 9:39 pm
Posts: 600
I'm currently installing the DA9000 groupset onto my Parlee. Regarding the rear derailleur cable going through and into the pinch bolt...the angle before the pinch bolt seems awfully sharp. I'm fine tuning the shifting...and although the shifting seems fine, i see some of the coated shifter cable fraying due to the extreme sharp angle.

Is this normal? or am I installing this incorrectly. Seems that alot of reviews have mentioned the sharp angle (i.e. BikeRumor.com) but no one has mentioned the fraying of the coating.

_________________
- AX Lightness Vial EVO D + DA9070 + Enve SES 2.2 Enve carbon hubs
- Parlee Altum + DA9070 + Enve 3.4 Tune/Dash hubs
- Parlee ESX + DA9070 + Enve SES 6.7 CK hubs
- Independent Fabrication Ti FLW + Campy SR11 + Enve 3.4 CK hubs


Top
   
 Post subject:
PostPosted: Tue Jul 16, 2013 3:52 pm 
Offline
Shop Owner

Joined: Sat Jun 13, 2009 4:02 am
Posts: 1980
Location: NoVA/DC
It's totally normal, and is the one glaring (non)issue on an otherwise outstanding group. Don't worry about the fraying. If it's unsightly for you, put a lighter to it.

Sent from my EVO using Tapatalk 4 Beta


Top
   
PostPosted: Tue Jul 16, 2013 4:12 pm 
Offline

Joined: Tue May 23, 2006 9:39 pm
Posts: 600
thx. you would think that Shimano would smooth out or widen the outlet of the area where it takes a sharp bend. it only shows up on the 11, 12, 13 cogs.

_________________
- AX Lightness Vial EVO D + DA9070 + Enve SES 2.2 Enve carbon hubs
- Parlee Altum + DA9070 + Enve 3.4 Tune/Dash hubs
- Parlee ESX + DA9070 + Enve SES 6.7 CK hubs
- Independent Fabrication Ti FLW + Campy SR11 + Enve 3.4 CK hubs


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 3 posts ] 

   Similar Topics   Author   Replies   Views   Last post 
There are no new unread posts for this topic. Ultegra front derailleur cable tension question

in Road

nemeseri

5

233

Sat Apr 23, 2016 3:48 am

Canofale View the latest post

There are no new unread posts for this topic. New Campagnolo 11 speed cable pull&derailleur actuation rati

in Road

vejnemojnen

12

1061

Sat Mar 12, 2016 1:23 pm

vejnemojnen View the latest post

There are no new unread posts for this topic. Colnago C60 rear brake cable routing?

in Road

wilwil

3

362

Wed Feb 10, 2016 8:23 pm

JohnnySea View the latest post

There are no new unread posts for this topic. Shimano Rear Derailleur Question

in Road

jrock457

2

476

Mon Jul 27, 2015 1:36 pm

glepore View the latest post

There are no new unread posts for this topic. 3D printing rear derailleur hanger

in Road

ChristianB

5

418

Wed Jul 20, 2016 7:14 pm

Camilo View the latest post


All times are UTC+01:00


Who is online

Users browsing this forum: Baidu [Spider], Bing [Bot], defride, HugoDrax and 29 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited