HOT: Active* forum members generally gain 5% discount at starbike.com store!
Weight Weenies
* FAQ    * Search    * Trending Topics
* Login   * Register
HOME Listings Blog NEW Articles FAQ Contact About




Post new topic Reply to topic  [ 2 posts ] 
Author Message
PostPosted: Fri Jun 14, 2013 10:38 pm 
Offline

Joined: Tue Jul 27, 2010 10:04 am
Posts: 378
A recent switch from Shimano to Campag necessitated changing the freehub on my Dati hubs. It was a five minute job and all seemed well. On the workstand the Campag freehub engages to pedal and coasts/freewheels nicely. However whenever I actually take the bike on the road the freehub engages fine to pedal but whenever I coast/freewheel the freehub begins to intermittently jam or snag causing the chain to slap off the chainstay. I've tried various different lubricants ranging from light oil, medium oil, TriFlow and light grease but the problem persists. I also removed the Campag freehub and re-fitted the orginal Shimano one again, which had been working perfectly, and now it's doing the same! So obviously there's nothing wrong with the Campag freehub and it's more a problem with the manner in which I'm fitting the freehub. When I initially removed the Shimano freehub I do recall noting that there was a definite lack of any lubricant but, that said, it was working fine. Is there a specific lubricant I should be using with these Dati hubs or am I missing something in the fitting process? Any comments would be appreciated. Ta.

_________________
Colnago M10 viewtopic.php?f=10&t=91208&hilit=colnago+m10+maob
Simplon Pavo III viewtopic.php?f=10&t=116069"


Top
 Profile  
 
PostPosted: Sat Jun 15, 2013 4:08 pm 
Offline
User avatar

Joined: Wed Apr 25, 2007 10:23 am
Posts: 724
Location: Pack filler
I can't comment on that particular hub, but usual suspects are:
Too much grease ( esp in DT hubs)
Seals binding. Has it got a big flange seal that's not sat properly?
Reassembled incorrectly? The few novatec and KT hubs that I've worked on have always been a pain, and I did find a way that got around this problem. Can't remember what it was though, sorry.
Is It possible to mount the free hub to the axle and lock it up, then fit to the hub?
Hope any of this helps...

_________________
Official cafe stop tester


Top
 Profile  
 
Posted: Sat Jun 15, 2013 4:08 pm 


Top
  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 2 posts ] 


Who is online

Users browsing this forum: Bing [Bot], Exabot [Bot], tommasini and 36 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  

   Similar Topics   Author   Replies   Views   Last post 
There are no new unread posts for this topic. Powertap G3 - freehub splines

[ Go to page: 1, 2 ]

in Road

sawyer

16

398

Wed Dec 03, 2014 9:03 pm

mattr View the latest post

There are no new unread posts for this topic. New Fulcrum Racing Zero - Freehub material

in Road

excremanwu

4

601

Tue Jul 29, 2014 1:08 pm

Stolichnaya View the latest post

There are no new unread posts for this topic. Help to verify freehub body replacement

in Road

sdexter

10

717

Fri Feb 21, 2014 2:42 pm

goodboyr View the latest post

There are no new unread posts for this topic. Fulcrum Racing 5 freehub play

in Road

mogwaiboi

4

602

Thu Apr 10, 2014 12:37 pm

martinko View the latest post

There are no new unread posts for this topic. Lightweight Standard freehub play

in Road

jimaizumi

3

321

Fri Jul 25, 2014 2:40 am

sedluk View the latest post


It is currently Thu Dec 18, 2014 3:32 am

All times are UTC + 1 hour




Advertising   –  FAQ   –  Contact   –  Convert   –  About

© Weight Weenies 2000-2013
hosted by starbike.com


How to get rid of these ads? Just register!


Powered by phpBB