Weight Weenies
* FAQ    * Search    * Trending Topics
* Login   * Register
HOME Listings Blog NEW Galleries NEW FAQ Contact About
It is currently Sat May 28, 2016 9:12 pm
Recently the board software has been updated and there are some known bugs/failures:
- Avatars are currently not being displayed ✔ FIXED
- Tapatalk connection is currently broken ✔ FIXED

If you find more errors please post it here: http://weightweenies.starbike.com/forum/viewtopic.php?f=7&t=139062

All times are UTC+01:00

Post new topic  Reply to topic  [ 10 posts ] 
Author Message
PostPosted: Sat Aug 04, 2012 1:03 am 

Joined: Sun Jul 29, 2012 12:49 am
Posts: 434
Hi there,

Currently considering switching between 12/27 and 12/29 cassettes on a mechanical Campy SR11 drive train (52/39 chain rings), based on total elevation of ride. Question is -- do I have to add 1 or 2 chain links when switching to the 12/29 due to the larger diameter of the biggest ring? I'm hoping not but would like confirmation from the aficionados. Thanks in advance.

PostPosted: Sat Aug 04, 2012 1:23 am 

Joined: Sat May 07, 2011 12:23 am
Posts: 182
Depends really on the length of your existing chain, and how they sized it during installation. You might be fine.

PostPosted: Sat Aug 04, 2012 2:07 am 
User avatar

Joined: Wed Sep 29, 2010 4:25 pm
Posts: 94
Location: MA
indeed does depend on chain length, but I regularly switch between 12-25, 12 - 27 and 12-29 without having to add links to the chain

Ride Strong


PostPosted: Sat Aug 04, 2012 3:03 am 

Joined: Thu Jan 27, 2011 9:52 pm
Posts: 419
Location: USA
I just changed from 12/27 to 12/29 SR and my chain was fine. But like mentioned before, it also depends on your current chain length.

PostPosted: Sat Aug 04, 2012 3:15 am 

Joined: Sun Jul 29, 2012 12:49 am
Posts: 434
Thanks for the responses -- will give it a try.

PostPosted: Sat Aug 04, 2012 3:23 am 

Joined: Tue Mar 20, 2012 1:19 am
Posts: 60
Also depends on whether you use the big/big combination. If you avoid it then its not going to be a problem even if your chain was set up at the minimum length for the 12-27 cassette. You should be avoiding that combination anyway, as it will wear your chain/drivetrain a lot and its inefficient (most power loss). Of course if you are racing then its possible to forget in the heat of the moment.

Be aware that changing into big/big on a work stand and spinning away is a little different to changing into that combination under load while riding. Look at the rear derailleur on the stand, feel the cage with your hand, can you move it up and down a little bit, does it have a little bit of play? If it does you are probably fine in that combination-you aren't going to bend or snap something as your frame flexes under power as the chain has a tiny bit more slack to take up.

PostPosted: Thu Jun 06, 2013 4:08 pm 
User avatar

Joined: Sun Feb 22, 2009 9:53 pm
Posts: 902
can never get my head around these things. Basically, running a 12/25 cassette at the moment but going to swap it over for a 12/27 for an upcoming trip to the alps. Will this require any links to be added to the chain?


PostPosted: Thu Jun 06, 2013 4:33 pm 
Shop Owner

Joined: Sat Jun 13, 2009 4:02 am
Posts: 1980
Location: NoVA/DC
In most cases, the chain is sized as the longest chain that will work in the small cog/small ring. Then it is up to the derailleur's chain wrap capacity to do the rest.
assuming this is how your chain was sized, it will make no difference which cassette you choose, the chain will be fine.
Just to be safe, install the larger cassette, IN THE STAND shift to the large chainring and shift to the second largest cog. Then slowly pedal while shifting to the largest cog and see if the derailleur handles it or locks up. Obviously, if it locks up due to the chain being too short, you need a longer chain.

Sent from my EVO using Tapatalk 4 Beta

PostPosted: Thu Jun 06, 2013 10:03 pm 

Joined: Fri Jun 06, 2008 11:41 am
Posts: 201
Location: Bucks County PA USA
Use this handy calculator:

http://www.machinehead-software.co.uk/b ... hcalc.html

or the method of wrapping around big chainring and biggest sprocket on cassette bypassing derailleur - this length of chain plus two links is ideal.

All this being done, even if you're a little tight in the 27, it will generally be OK. You shouldn't cross chain on the big ring and 27 anyway.

PostPosted: Fri Jun 07, 2013 12:38 am 

Joined: Tue Nov 11, 2003 9:47 pm
Posts: 2154
Location: Santa Cruz, California, USA
Even though you shouldn't use the big ring/big cog combo, I think it's a really bad idea to set up a bike so the chain is too short for it to work. If you shift into it by mistake you will break something. At the very least that will end your ride that day.

I'm generally pretty aware of what gear I am in, but I have done it a couple times when I was tired, accidentally left it in the big ring and had not yet realized it.

I know that's not what you're saying Idamelio, I just want to make it clear to other people. Kind of tight is ok, too tight to fit is not. Even if it's only kind of tight you may find that the cage rubs on the 2nd cog due to the extreme angle of the cage.

Longest chain that works in small/small is a better way to do it, unless you are beyond the wrap limits of your derailleur. Then saggy in the small ring and small cogs is preferable to too tight in the big ring/big cog.

Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 10 posts ] 

   Similar Topics   Author   Replies   Views   Last post 
There are no new unread posts for this topic. SRAM X-Glide 1190 Cassette + Ultegra RD + Chain??

in Road




Tue May 17, 2016 8:40 am

964Cup View the latest post

There are no new unread posts for this topic. FSA Team Chain vs Dura Ace Chain

in Road




Wed May 04, 2016 4:10 pm

madcow View the latest post

There are no new unread posts for this topic. Giant TCR SL ISP/ Stem length?????????

in Road




Thu Dec 31, 2015 2:06 pm

wingguy View the latest post

There are no new unread posts for this topic. Q. tubeless valve length?

in Road




Thu Jan 07, 2016 2:13 am

ohhyeok90 View the latest post

There are no new unread posts for this topic. large giant tcr crank length?

in Road




Mon Jan 18, 2016 10:04 pm

Alpine318is View the latest post

All times are UTC+01:00

Who is online

Users browsing this forum: canuma, Exabot [Bot], UncleJamsArmy and 14 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited