hi,
i have a lapierre 9it's a 2012 Xelius) that currently has a SRAM S900 crankset in the press-fit BB. i would like to use this on a new cannondale supersix that has a BB30. can i use this crankset and if not what adapter or BB do i need to get to make it compatible? thanks.
BB30 Compatibility
Moderator: robbosmans
-
- Shop Owner
- Posts: 1980
- Joined: Sat Jun 13, 2009 4:02 am
- Location: NoVA/DC
It is directly compatible. You will need a bb30 bearing kit for the other bike (bearings, shields, circlips), and then it drops in.
Sent from my EVO using Tapatalk 4 Beta
Sent from my EVO using Tapatalk 4 Beta
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
thisisatest wrote:It is directly compatible. You will need a bb30 bearing kit for the other bike (bearings, shields, circlips), and then it drops in.
Sent from my EVO using Tapatalk 4 Beta
Are you sure? I'm not familiar with the bike after looking online it looks like it's a BSA frame. It would still work on the Supersix, you would just need some sort of adapter like the Wheels Manufacturing BB30 to SRAM adapters.
Edit: Do you have crank bolts on both cranks or just the non-drive side crank?
-
- Shop Owner
- Posts: 1980
- Joined: Sat Jun 13, 2009 4:02 am
- Location: NoVA/DC
Correction: it is especially confusing due to you having an S900 crankset, which I THOUGHT only came with a 30mm spindle. It apparently was also available with a GXP fitment. It will still fit in a Cannondale bb30 frame, you will instead need the bb30 bearings plus a WheelsMfg bb30-to-GXP ADAPTER.
Sent from my EVO using Tapatalk 4 Beta
Sent from my EVO using Tapatalk 4 Beta