HOT: Active* forum members generally gain 5% discount at starbike.com store!
Weight Weenies
* FAQ    * Search    * Trending Topics
* Login   * Register
HOME Listings Articles FAQ Contact About




Post new topic Reply to topic  [ 4 posts ] 
Author Message
PostPosted: Wed May 22, 2013 9:46 am 
Offline

Joined: Mon Aug 06, 2007 1:22 am
Posts: 166
Excuse the carbon paranoia here...

Was installing a set of di2 shifters into these bars. Since the clamp mounting surface has that rough sand-paper like coating, I didn't use any carbon assembly paste.

Put everything together and start tightening the clamps. I would tighten it finger tight, and then try rotating the shifters. If they still moved, I would tighten some more - each time a tiny bit incrementally.

After not all that much torque and with the shifters still moving if I twisted them hard enough, I tighten it a bit more and I heard a "crack" sound come from the bar.

So I take everything apart, inspected with a flashlight and magnifying glass and could not find a crack or scratch on the bar. Put everything back together. Grab both sides of the bars and try to flex them as hard as I could. No creaks, no sounds. Put the front wheel between my ankles, grab the bar ends and tried twisting it from side to side. Nothing.

What does everyone suggest? Put some miles on it and see if anything turns up? Or toss them (brand new bars :( ) and not risk it?

How strong are these bars anyways? for those of you who have actually cracked a handlebar by overtightening the shifter clamps - how hard were you tightening them before something broke?

thanks in advance


Top
 Profile  
 
PostPosted: Wed May 22, 2013 10:27 am 
Offline
Shop Owner

Joined: Sat Jun 13, 2009 4:02 am
Posts: 1965
Location: NoVA/DC
1. I've tightened lever clamps pretty hard before on many, many 3t bars and have had no failures.
2. Sometimes the T-bolt at the lever clamp is turned from the clamp itself and will slide into place after a lot of torque is applied, making a "pop" or "crack" sound. It's definitely a different sound than carbon cracking, but I wouldn't be surprised if one mistook it for that.
3. Use grip paste no matter what.


Top
 Profile  
 
Posted: Wed May 22, 2013 10:27 am 


Top
  
 
PostPosted: Wed May 22, 2013 3:27 pm 
Online

Joined: Fri Nov 14, 2008 4:55 am
Posts: 423
Use a torque wrench!!

Carbon paste for sure but especially if you are using the LTD bars use a torque wrench. Yes carbon can generally take quite a bit of force but the tolerances with the LTD plastic are pretty refined. It's easier to go past 5 or 7nm than you realize.

I would agree the ti bolts can ping and make noise as well while tightening if you have those.

_________________
Just ride ..


Top
 Profile  
 
PostPosted: Thu May 23, 2013 3:13 am 
Offline

Joined: Fri Dec 14, 2012 4:17 am
Posts: 66
I too would recommend use of a torque wrench for installation of carbon parts.

A respectable torque wrench can be had for ~100 USD new. A fraction of what 3T Ltd bars cost.


Sent from my iPad using Tapatalk HD

_________________
My Bikes


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 4 posts ] 


Who is online

Users browsing this forum: Bing [Bot], Google Adsense [Bot], Montana, Yahoo [Bot] and 36 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  

   Similar Topics   Author   Replies   Views   Last post 
There are no new unread posts for this topic. Di2/Osymetric Installation issues

in Road

Fixie82

2

592

Sun Sep 29, 2013 11:31 am

Fixie82 View the latest post

There are no new unread posts for this topic. EPS V2 Installation

in Road

robhall2003

1

343

Wed Apr 30, 2014 6:30 pm

Butcher View the latest post

There are no new unread posts for this topic. BTP Hoods Installation

in Road

desperado95219

6

547

Tue Mar 11, 2014 10:18 am

EpicRide View the latest post

There are no new unread posts for this topic. shimano cassette installation

in Road

tinchy

5

607

Wed Feb 12, 2014 7:33 pm

eric View the latest post

There are no new unread posts for this topic. Rotor 3D+ installation problem

in Road

Method01

10

581

Sun Sep 07, 2014 11:33 am

highdraw View the latest post


It is currently Thu Sep 18, 2014 1:07 am

All times are UTC + 1 hour




Advertising   –  FAQ   –  Contact   –  Convert   –  About

© Weight Weenies 2000-2013
hosted by starbike.com


How to get rid of these ads? Just register!


Powered by phpBB