Weight Weenies
* FAQ    * Search    * Trending Topics
* Login   * Register
HOME Listings Blog NEW Galleries NEW FAQ Contact About Impressum
It is currently Sun Dec 17, 2017 10:58 pm

All times are UTC+01:00





Post new topic  Reply to topic  [ 8 posts ] 
Author Message
PostPosted: Fri May 10, 2013 6:14 pm 
Offline

Joined: Wed Jan 10, 2007 10:56 pm
Posts: 1386
Location: Canada
In short, I just got a set of 2013 404's. I've got a 10 speed shimano drivetrain. The wheels come with a 1.85mm shim. Zipp CS insists you only need this shim and the cassette. They say you don't use the Shimano 1mm shim too. To me this makes no sense. I asked them what happens if you have a 9 speed cassette. They said same thing....... Just the 1.85mm Zipp spacer. Are they smoking something or is there something very special about the new Zipp cassette carrier?

_________________
My RCA


Top
   
Posted: Fri May 10, 2013 6:14 pm 


Top
   
 
PostPosted: Fri May 10, 2013 8:54 pm 
Offline

Joined: Wed Mar 17, 2004 1:38 pm
Posts: 1738
The 9sp cassette is 1mm wider than the 10sp cassette. If the wheel is made to accept 9sp cassettes, then you will need that 1mm spacer with 10sp cassettes. If, as Zipp have said, you don't employ the 1mm spacer with 10sp cassettes, then the body will be 1mm too short to properly handle 9sp cassettes, assuming that 1.85mm spacer is used when using non-11sp cassettes.


Top
   
PostPosted: Fri May 10, 2013 9:08 pm 
Offline

Joined: Thu Feb 10, 2011 8:58 pm
Posts: 155
I have a set of Enve/DT 11 speed wheels and I have a 1.85 spacer. I run 10 spd. Works great.


Top
   
PostPosted: Fri May 10, 2013 10:09 pm 
Offline

Joined: Wed Jan 10, 2007 10:56 pm
Posts: 1386
Location: Canada
Well your RD will be 1mm out. As well, what I found was that without the 1mm spacer, when you tighten the lock ring, you don't feel the serrated teeth "bite" till almost full torque on the ring. With the 1mm installed the teeth bite early.

_________________
My RCA


Top
   
PostPosted: Sat May 11, 2013 12:13 am 
Offline

Joined: Wed Jun 01, 2011 7:53 am
Posts: 699
I have the 2013 404s with the 11sp freehub body. I use the 1.85 shim and also the paper thin shim that comes with the 10sp DA cassette together to get perfect shifting. This is with an otherwise all sram red drivetrain, I just use DA cassettes because they sound better and have more gear range options.


Top
   
PostPosted: Sat May 11, 2013 1:07 am 
Offline

Joined: Sun Sep 27, 2009 9:54 am
Posts: 359
Location: Australia
i use the Zipp 1.85mm + DA cassette 1mm shim for 10speed.
If i didn't i wouldn't be able to swap out to my Enve/Tune MAG150 without re-tuning my RD every time.

_________________
2012 Scott Foil Premium


Top
   
PostPosted: Sat May 11, 2013 2:13 pm 
Offline
Shop Owner

Joined: Sat Jun 13, 2009 4:02 am
Posts: 1980
Location: NoVA/DC
You absolutely use the Shimano 1mm spacer as well as the 1.85mm spacer. the service guy is wrong. If you called them again, you would probably get the correct answer.


Top
   
PostPosted: Sat May 11, 2013 4:11 pm 
Offline

Joined: Wed Jan 10, 2007 10:56 pm
Posts: 1386
Location: Canada
I totally agree. Fact of the matter is that I had two conversations on the live chat, followed up by an email all insisting that you didn't need the 1mm. That's why I posted here. I'm hoping that Zipp sees this and updates their CS team on the right answer.

_________________
My RCA


Top
   
Posted: Sat May 11, 2013 4:11 pm 


Top
   
 
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 8 posts ] 

   Similar Topics   Author   Replies   Views   Last post 
There are no new unread posts for this topic. Zipp SL Speed v SL Sprint

in Road

Shrike

5

1603

Wed Mar 01, 2017 10:57 am

Shrike View the latest post

There are no new unread posts for this topic. New Zipp SL speed seatpost, any one used one??

in Road

Arfer01

3

710

Thu Jan 19, 2017 5:54 am

GothicCastle View the latest post

There are no new unread posts for this topic. Strange Di2 problem

[ Go to page: 1 2 3 ]

in Road

cyclespeed

39

3413

Thu Jul 06, 2017 3:31 am

ParisCarbon View the latest post

There are no new unread posts for this topic. Compatibility Question - 11 speed Crankset & 9 Speed running gear

in Road

pfnsht

13

626

Fri Aug 25, 2017 2:31 pm

goodboyr View the latest post

There are no new unread posts for this topic. Family Budget 5700 10 Speed to 11 Speed questions

[ Go to page: 1 2 ]

in Road

Afnole16

15

1306

Thu Dec 22, 2016 5:06 pm

JamesGRC View the latest post


All times are UTC+01:00


Who is online

Users browsing this forum: alorast, JScycle, mike001100, reknop, TobinHatesYou, Yahoo [Bot] and 37 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited