Page 1 of 1
Keo Blade spindle tool
Posted: Thu Apr 18, 2013 8:01 pm
by ParisCarbon
Hi everyone,
I noticed my pedal ticking again and noticed that the spindle had turned about 1 turn out... On talking to a few online shops there seems to be a special tool that is needed to tighten the spindle which I cant find anywhere... is there an alternative tool for tightening?
Thanks
Keo Blade spindle tool
Posted: Thu Apr 18, 2013 8:01 pm
by Weenie
Visit
starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
Keo Blade spindle tool
Posted: Fri Apr 19, 2013 1:37 am
by 743power
18mm 12pt box wrench
Re: Keo Blade spindle tool
Posted: Sat Apr 20, 2013 1:28 am
by Kayrehn
If the noise is a result of the spindle being loose, you better get it tightened fast - it's plastic on plastic there and pressure from cranking on it when it's loose can cracking the body easily. Use a bit of loctite on it to ensure it stays tight. Do not over-tighten it too!
Re: Keo Blade spindle tool
Posted: Sun Apr 21, 2013 12:25 am
by ParisCarbon
I emailed look and they told me it was a 19mm
Keo Blade spindle tool
Posted: Sun Apr 21, 2013 1:16 am
by Calnago
It is 19mm. I've pulled them apart before.
Keo Blade spindle tool
Posted: Sun Apr 21, 2013 1:42 am
by 743power
Critical typo there. Sorry!
Keo Blade spindle tool
Posted: Sun Apr 21, 2013 1:42 am
by Weenie
Visit
starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
Re: Keo Blade spindle tool
Posted: Sun Apr 21, 2013 3:14 am
by ParisCarbon
NP
