Page 1 of 2

Colour coding opinions?

Posted: Sun Apr 14, 2013 4:34 pm
by Devon
So I'm currently gathering parts for my CR1 build. The bike is raw carbon with white/silver details. I'll be putting all black kit on it.

Do I go with white or black cable housings?

Image

Colour coding opinions?

Posted: Sun Apr 14, 2013 4:51 pm
by Frankie - B
Go with pink!

Or the lightest housing you can find.


Sent from my iPad using Tapatalk HD

Colour coding opinions?

Posted: Sun Apr 14, 2013 4:51 pm
by Weenie

Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓    Broad Selection ✓    Worldwide Delivery ✓

www.starbike.com



Re: Colour coding opinions?

Posted: Sun Apr 14, 2013 4:53 pm
by Devon
Frankie - B wrote:Go with pink!

Or the lightest housing you can find.


I was thinking about it but there's the issue of clashing kit.

I was thinking about just getting SRAM housing to go with the groupset, and to take advantage of the extras that come with it, what would people advise?

Re: Colour coding opinions?

Posted: Sun Apr 14, 2013 4:57 pm
by Rick
It is still before Memorial day....so no white.

Re: Colour coding opinions?

Posted: Sun Apr 14, 2013 5:00 pm
by Devon
Rick wrote:It is still before Memorial day....so no white.


I'm British, what's the relation to bikes?

Re: Colour coding opinions?

Posted: Sun Apr 14, 2013 8:02 pm
by kgt
white

Colour coding opinions?

Posted: Sun Apr 14, 2013 8:07 pm
by split
Gold jag wires.

Re: Colour coding opinions?

Posted: Sun Apr 14, 2013 8:09 pm
by Zen Cyclery
The white housing looks cheap IMO. I think the gold Jag would be sweet.

Re: Colour coding opinions?

Posted: Sun Apr 14, 2013 10:09 pm
by Devon
Definitely in agreement with the gold suggestions, I was however planning to
keep the gold more on the subtle side with a Gold Chain, ferrules and crimps.
With maybe matching QR Skewers and seat clamp.

Gold cables may be a bit much? The braided Jagwire one does look cool though...

Image

Re: Colour coding opinions?

Posted: Sun Apr 14, 2013 11:06 pm
by sigismond0
If there's as much silver as it looks like there is in the frame, go with the silver braided Jagwire. Definitely don't to gold unless you plan on using other gold accents to tie it in. If not silver, then white for sure.

Re: Colour coding opinions?

Posted: Sun Apr 14, 2013 11:51 pm
by Liggero
black

Re: Colour coding opinions?

Posted: Mon Apr 15, 2013 12:04 am
by SpinnerTim
I'd go full Beetlejuice with alternating black and white Nokon housings and Fizik Dual tape in alternating black/white.

http://biketart.cc/wp-content/uploads/2 ... lland1.jpg

Sandworms, ya know?

http://images2.wikia.nocookie.net/__cb2 ... dworms.jpg

Rock the Oreo, go for it :-)

-Tim

Re: Colour coding opinions?

Posted: Mon Apr 15, 2013 11:45 am
by Devon
I have the Fizik logo tape (Black with white logo).

The silver braided Jagwire is definitely a good option! How does this fair with cable rub?

Nokon is another option I was considering but it's fairly expensive.

Re: Colour coding opinions?

Posted: Mon Apr 15, 2013 12:30 pm
by HillRPete
Black all the way, the frame is busy enough.
White would go with all-white kit, maybe.
Trust me, I've been called a tart many times.

Re: Colour coding opinions?

Posted: Mon Apr 15, 2013 2:12 pm
by sigismond0
alexh wrote:I have the Fizik logo tape (Black with white logo).

The silver braided Jagwire is definitely a good option! How does this fair with cable rub?

Nokon is another option I was considering but it's fairly expensive.


I've been very happy with braided Jagwire in the past. It's not super-top-of-the-line stuff, but its plenty slick and more durable than the higher end stuff. (I gave up on Gore for being too fragile in favor of the Jag.)

Re: Colour coding opinions?

Posted: Mon Apr 15, 2013 2:12 pm
by Weenie

Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓    Broad Selection ✓    Worldwide Delivery ✓

www.starbike.com